mhild
Member
Does anyone know where the plug is that the PC-8 plugs into for switching? Everything I read says it's by the battery, but I can't find it anywhere. 2023 Super Tenere
Does anyone know where the plug is that the PC-8 plugs into for switching? Everything I read says it's by the battery, but I can't find it anywhere. 2023 Super Tenere
If I remember right, there are two black rubber boots in the area just to the right of the top side of the battery and just to the left of the space for the tool bag. In one of these boots there should be 2 connectors (a 3 pin and a 4 pin connector). The PC-8 uses the 3 pin connector.Does anyone know where the plug is that the PC-8 plugs into for switching? Everything I read says it's by the battery, but I can't find it anywhere. 2023 Super Tenere
RCIf it's the same as on a 2014, there's a modular connector in the same space under the right hand fairing where the OEM tool bag is strapped. That's the connector you use for the trigger wire for the relay that goes with the PC-8.
Here's a thread that shows what it looks like: https://www.yamahasupertenere.com/index.php?threads/eastern-beaver-pc-8.34824/#post-525723
That post is for a 2015, but I doubt that they moved the location of that modular connector for later models.
Yep, my bad, I posted the wrong link. Here's the correct one: https://yamahasupertenere.com/index.php?threads/eastern-beaver-pc-8-install-pics.8215/RC
Your link did not work right for me.