SuperDave
New Member
- Joined
- Jan 27, 2019
- Messages
- 3
Thx Chris!High there Dave and congratulations on your trip to Death Valley on the ST. I'm almost sure the HeliBars are going to fix that issue. Also do yourself a favor and buy 4 new rubber pads to tilt the seat back (you will need 4 for raised and lowered position). I noticed right away shoulder pressure when riding mine home from the dealership. I put it on the center stand and did my old ergo trick: sit up in a normal relaxed riding position with your eyes closed and see where your hands fall. Do this a few times. Mine consistently fell right where they would be with the HeliBar risers installed.
It amazes me how well the guys engineered those risers. When I called to thank them, I was told that the people who develop these actually ride and do a bunch of testing before releasing the actual end product.
Your rubber risers are PN: 22W-24741-00-00
The HeliBar risers bring the bar up 1 1/4" (32mm) and back 1 1/2" (38mm) for the Gen 2
I’ll order the Helibars tomorrow and report back!
I already made my seat level by taping some tap washers on the seat rail. Works good but I might get the rubbers for a more permanent fix.
Dave.