greg the pole
There are no stupid questions, only stupid people
Morning all,
Some folks here have inquired about a possible TC memory module for the XT1200.
My buddy Richard has built a very nice unit for the 2016/2017 HAT and it works a treat.
https://thetenerist.wordpress.com/2018/01/13/honda-crf1000-africa-twin-traction-control-memory-module-installation/
For those interested, please PM me, or email Richard direct at: 12operformance@gmail.com
I think Richard would need a minimum of 5 guys to go through the R and D for the XT.
I no longer own mine, but know a few guys locally that I can borrow theirs as a test mule.
Please specify if your XT is 1st or 2nd gen. I have access to a 1st gen in the Southern Alberta Area. If theres an interested memeber with a 2nd gen, we could likely hook you up with a free TC module if we get to prod your XT.
The kit would come with a complete set of instructions specific to the XT. If I have time, and helping him out, I'll take pictures as we install it on a XT.
Cost would likely be in the $130-$150 USD mark.
Please don't post on how expensive it is, and how you can hold a button to do the same thing.
If it's not for you I don't want to hear about it. Haters and all that...
There's quite a bit material that goes into it, labor not to mention testing for a specific model.
EDIT/UPDATE:
on second thought...this may be harder than anticipated.
Since between NA (Canada and 'Merica) there are 4 different variations between the two countries and generation of bikes.
I currently only have access to a 1st gen Kanukistan model.
For the time being, I'll shelve the TC thing unless theres serious interest from a given group, i.e. 2nd Gen USA bikes
I did put togehter a ghetto ABS off switch for those that are interested (below, click on picture for complete parts list).
This is a pretty easy mod, with about $50 worth of parts laying about.
Some folks here have inquired about a possible TC memory module for the XT1200.
My buddy Richard has built a very nice unit for the 2016/2017 HAT and it works a treat.
https://thetenerist.wordpress.com/2018/01/13/honda-crf1000-africa-twin-traction-control-memory-module-installation/
For those interested, please PM me, or email Richard direct at: 12operformance@gmail.com
I think Richard would need a minimum of 5 guys to go through the R and D for the XT.
I no longer own mine, but know a few guys locally that I can borrow theirs as a test mule.
Please specify if your XT is 1st or 2nd gen. I have access to a 1st gen in the Southern Alberta Area. If theres an interested memeber with a 2nd gen, we could likely hook you up with a free TC module if we get to prod your XT.
The kit would come with a complete set of instructions specific to the XT. If I have time, and helping him out, I'll take pictures as we install it on a XT.
Cost would likely be in the $130-$150 USD mark.
Please don't post on how expensive it is, and how you can hold a button to do the same thing.
If it's not for you I don't want to hear about it. Haters and all that...
There's quite a bit material that goes into it, labor not to mention testing for a specific model.
EDIT/UPDATE:
on second thought...this may be harder than anticipated.
Since between NA (Canada and 'Merica) there are 4 different variations between the two countries and generation of bikes.
I currently only have access to a 1st gen Kanukistan model.
For the time being, I'll shelve the TC thing unless theres serious interest from a given group, i.e. 2nd Gen USA bikes
I did put togehter a ghetto ABS off switch for those that are interested (below, click on picture for complete parts list).
This is a pretty easy mod, with about $50 worth of parts laying about.
Last edited: