Wiring Rigid 90661 High/Low Lightbar

[Chefdave]

I picked up one of the new Rigid 90661 Lightbars with 100% High/20% Low settings. I've read through everything that I could find here but haven't seen anything on this specific model.

I'm interested in wiring it with a master ON/OFF switch and then have the 100% High setting triggered by the High beam switch and the 20% Low setting triggered by the Low beam switch.

I''ll be powering it through a PC-8 fusebox. Any thoughts/tips on the switching wiring?

Thanks!

 

[Don in Lodi]

Grab a common five wire relay, not a four wire. One circuit will be a normally on/closed for low, and when triggered by the high beam shutter it will switch to the 100%. circuit I ran a second relay for a master on/off, but later decided that I have them on all the time anyway... used that relay for another set of lights on the switch.

 

[jeepinoutwest]

Would love to see pics installed and an install write up if you have time.