OEM pannier lock tumbler kit.

[gv550]

I have this kit, 59C-281C0-00, and similar to a valve shim kit I've used up all of one size tumbler #3 which is 5.5 mm. Unlike a shim kit the tumbler is not available separately so I'm hoping to buy or swap a few from someone who may have extras. I have an abundance of #1 and #4 to swap.

 

[Matt51F1]

I have this kit, 59C-281C0-00, and similar to a valve shim kit I've used up all of one size tumbler #3 which is 5.5 mm. Unlike a shim kit the tumbler is not available separately so I'm hoping to buy or swap a few from someone who may have extras. I have an abundance of #1 and #4 to swap.
View attachment 111541

Would a locksmith be any help?

 

[gv550]

And I discovered............... I can install a #4 in place of a #3, put the key in the lock and file the #4 down to the barrel and voila, I now have a #3!

 

[Matt51F1]

I’ve managed to locate a 3-lock set out of the USA for about $83. I’ve sent it to a freight forwarder as the postage was going to be just over $81.
I prefer to change the locks anyway as I don’t like the idea of the main bike lock and the panniers on the same key.