Need help identifying parts

[xltsks]

Hello everyone! I just purchased my first S10, a new-to-me 2016 Non-es 60th Anniversary model and found this installed. It has a black 1-piece handlebar mount with 2 threaded holes between the clamps. Also has a mount bolted to the frame behind the steering stem with 2 raised towers that have a threaded hole in each one. Does anyone recognize what this is and can shed some light on what they are used for? Thanks in advance for the help!!
Will

 

[gv550]

It appears to be an aftermarket handlebar mount/riser that may have included a steering damper.

 

[Sierra1]

The two little doo dads kinda remind me of bar stops. I haven't even looked at mine. I know that at the bar stops she turns tight. The top circle is probably aftermarket bar risers.

 

[xltsks]

It appears to be an aftermarket handlebar mount/riser that may have included a steering damper.

That’s what I was thinking too, I haven’t been able to find it online yet to confirm tho.

 

[Jlq1969]

The handlebar riser, it seems that it is not specifically for the S10….but it should work…..and the bracket with two risers, is probably a steering stop (if the handlebar is very flat, the controls could be stuck on the tank)

 

[xltsks]

I believe I may have finally found the answer. It appears to me, that it is what is left from a GPR steering dampener kit. I likely will never need it, so I’d rather have the stock handlebar mounts so I can remove these from the bike and get some ROX risers. Does anyone have stock handlebar mounts for a Gen2 S10 laying around collecting dust?