Arrow Header Downpipe Fit

Karson

Active Member
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Joined
Feb 26, 2012
Messages
2,001
Location
IOWA
Can anyone who's installed the arrow header explain what order you put yours together in? Also, what header tube goes on the left and what one goes on the right so that it hooks up into the collector correctly and has proper clearance throughout? The tubes are different lengths...

I've scoured the boards, and other than the hanger spring orientation thread, there's nothing on the install so I'm taking pictures and will document the process. Arrow's site is about as ambiguous as instructions get...

Thanks! -K
 

Blue_eyes

Blue_eyes
2011 Site Supporter
2012 Site Supporter
Joined
May 5, 2011
Messages
1,088
Location
The Netherlands

Karson

Active Member
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Joined
Feb 26, 2012
Messages
2,001
Location
IOWA
Appreciate it - I have the downpipes hung now and am onto the collector pipe. I see where the o2 sensor connector goes up in Jaxon's post - but for it to connect to the autotune do you have the o2 sensor connector coming out on the right or left side of the bike frame so that it can be optimally accessed.

That's my next task soon...
 

~TABASCO~

RIDE ON ADV is what I do !
Founding Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Vendor
Joined
Apr 4, 2011
Messages
7,391
Location
TEXAS
Karson said:
Appreciate it - I have the downpipes hung now and am onto the collector pipe. I see where the o2 sensor connector goes up in Jaxon's post - but for it to connect to the autotune do you have the o2 sensor connector coming out on the right or left side of the bike frame so that it can be optimally accessed.

That's my next task soon...

If you like, you can call my office in about 30 minutes and Ill walk you though it.............
 

Karson

Active Member
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Joined
Feb 26, 2012
Messages
2,001
Location
IOWA
~TABASCO~ said:
If you like, you can call my office in about 30 minutes and Ill walk you though it.............
Right on - I've got the entire header system bolted up now (thanks Blue_eyes) and have a couple questions before I dig into the PCV + AT.

Talk to you soon...
 
Top