Search results

Update . Took the bike to my mechanic. He took the fuel pump put again and tested it once more . This time it was showing 25psi. He found a rebuild kit for it and now it's running 52psi and the bike is now running .

Just cleaned the plugs . Tried to start it and it's trying but runs (not well ) for a few seconds. It's drained my soul this F thing ! I'll put it on a trailer and take it to my bike mechanic. It's way past my pay grade obviously. Thanks for all your help guys . I give up lol

And no numbers in the 50 range

61 and 62 have cleared. I'm going to take the plugs out tomorrow as I can't see why this bike shouldn't run . Maybe prior to removing the injectors I may of not disconnected the fuel pump and flooded the engine /wet the plugs. Since that time I've read the manual carefully and noted the pump...

And the pump primes for about 5 seconds on turning the key So I found some codes D06 17 DO8 1.1 D13 15 D14 17 D15 17 D62 1 D01 14 D03 126 D05 20 How do you tell if they are current codes or history Thanks And the battery is new , fully charged , and the correct cca. Connections all tight

50psi rather

It was tested at just under 59 psi I might run it on the bike and see if it has good pressure

I'll see info can get a noid light and go from there. No fault codes as far as I can see

I've read the manual yesterday and leant more about the bike in 2 hours than the 3 months owning it . Not sure how I test each injector to show it's getting power though .

It's had a full service by myself . Everything done except valves . I'm not sure about the harness . How do I tell ? The bike had no log books. Nothing was touched other than injectors out , cleaned and fuel pump scrutinized. I checked the injectors wires/ plugs visually. The problem arose...

Just read the manual re the F code. Meaning reserve Fuel not fault

Thanks for your reply Back in June when I got the bike it was idling rough and had the surging . I booked it in for a look over and TB sycn. Before that I ran a few tanks of premium fuel through it as God knows how old the fuel in the tank was . It improved over time but not perfect . The TB...

Hi, searched on here and YouTube. I've had my injectors cleaned. I've just installed everything. Bike won't run but starts every now and then for a few turn overs . Pumps been tested and it's fine. I put a new tea bag filter in it . I know diesel injectors need priming but what about dry...

Very sorry to hear that mate

The Lions road is a beautiful ride/drive

If you can send me a private message I'll give you my number and we can organise a ride

Cool I usually do a circuit around Cedar pocket, Pomona , Black Mountain out to Kenilworth then back home through the Mary valley. I get out to Woolooga every now and then

Sounds good mate . Where are you roughly ?

Roughly, every 1 mm change in length of the dog bones equates to 4 mm ride height

Thank you. I've borrowed a vaccume gauge and have plugs and air filter ordered. I'll get busy and do the basics first and go from there. Thank you all for your quick replies