Search results

Thanks Tabasco, Seems like a valve in the pump is jammed. Cycled the pump endless times and couldn't depress the brake pedal at all. Can't even release the brake fluid and bleed. In the end, bypassed the ABS pump

2012 super tenere Bleeded the front and rear brakes today First round after bleeding them, ABS light will light up whenever the rear brake is used Thinking that ABS pump needs to be cycled, jumped the diagnostic plug and cycled the pump a few times Both front lever and rear pedal had pulsing...

Well, I managed to get the t10 bulb out. A first I tried using a vacuum cleaner to suck that out, no luck. Disconnect the headlight assembly, shake a little and the bulb just pop right out from the hole. Hole in one!

Yeah the convex projector lens is blocking access to the front. I had wriggle and squeeze the flexible magnetic pickup tool just to get near the bulb. The claw of the 'reachy-grabby' tool is too big to squeeze into the lens :( I will try the disconnect and shake the hell out of it ... keep you...

I tried using a flexible magnetic pickup tool, the bulb does not have enough metal for it to get attached :( I think I had no choice but to disconnect the harness and shake it out. Is it easier to disconnect the sub harness from the headlight assembly ends or from the main harness end?

My LED pole light had unfortunately dislodged and fell into the headlight assembly. Is there any way to open the headlight lens cover and get the bulb out? See attached image

I am riding a white S10. The tank area around the front seat is turning yellow. Tried using 3M, turtle wax, doesn't seems to be able to restore the color. Anyone has this issue? How to whiten it?

A tip on installing the grip puppies or any handle grip without air compressor. Spray soap water inside the grip as well as on the handle bar. Especially more on the inlets. Align and fit the grip puppies onto the handle bar. Once a small portion of it is in place, turn and twist the grip...

Thanks Dallara & treemuncher, will try these solutions out!

I had a few micro scratches on the instrument (LCD) panel. Does anyone knows if normal LCD cleaning solutions are able to remove them?

Glad that it works for you ;) BTW you can experiment with different thickness of cable tie to get the "best" fit.

I use a small cable tie to tie it around the locking pin thereby "enlarging" it. The locking hock will latch to the "enlarged" pin making the lid tighter when you lock it. Did it for 3 of the OEM boxes. So far so good.