Search results

Yep, it was the immobilizer. There is no doubt now. It was damaged by the previous owner, don't know how he managed to damage it like that. The outside plastic was melted so he could get to the little electronic plate inside, the wire harness was suspiciously short for a immobilizer... I'm mad...

Hello again. So, ER-3 is back. I highly suspect the wiring is faulty. The error started to show up again late last year. Thought the little plate inside the immobilizer was starting to fail so I’ve bought one of those emulator plates. Replaced the plate that came with the motorcycle but it...

So...just came in from the garage. First thing I did was check the fuses in the two little boxes near the battery. All ok. I then started to prepare to lift the tank up and get to the air box and do the starter fluid thing and try cranking again with wot. But then..a tiny little brain fairy told...

So, my 2011 s10 pulled a fast one on me today. Tried to start it after 3 months of winter sleep. It had some chokes the first time, started for a second but it died. Second time it started righ up, worked fine for about 10 seconds, but as I was rolling it out of the garage, it started losing...

Yes, wires seem to detach on that tiny circuit board. I don't know why, maybe poor quality silica. It's not that hard to fix but it's very hard to pinpoint the problem if you never had it.

Hey man ! My problem is solved and I would like to thank you and this thread ! I got so lucky finding this ! So, I dismantled the part and gave it to the electronist friend of mine. I didn't rise the tank and didn't remove the air filter box to get to the screws as I improvised something; you...

Hey, I was hoping something else was the problem and I cleaned and checked most of the electrical sockets. Also I saw that a little hose of the air filter was disconnected and the air filter was really oily and dirty. So I changed the air filter and put it back together and the error keeps...

Thank you so much for taking your time to help me ! I'll try to work on it these days and post updates. :)

Hey ! I have the same problem and can't find a solution. After I reset the errors, the dashboard is fine, but after 10 minutes of riding the ER-e error pops up. The RPM needle goes wild just like yours did, Noyo, and the engine light flashes. Noyo, can you tell me how can I get to that wire ...