Search results

  1. J

    Jesse Luggage Gen II SOLD

    10" Odyssey II bags, top case and mounts $800 plus shipping from Albuquerque, come get them and I will install.
  2. J

    Farkles from 2014

    All prices include shipping to the lower 48 The following is what I have left: Factory Service Manual, not a copy $60 Wind deflectors (Gen 1 modified to fit Gen II) $60 ROX risers and extended clutch & brake lines $160 Yamaha Parts Plastic frame for adjusting seat height, I was going to...
  3. J

    Givi Sidecase Brackets No Longer Needed

    Looking for Givi sidecase brackets for my 2104 Tenere. Would also like a small Givi bag for left side.
  4. J

    Blue upper right cover

    Part Number 23P-2842N-00-P5 , this is the cover for a 2014 that is held on with 3 screws and 2 plastic push pins.
  5. J

    Ordering Upper Right Cover

    I found a long crack in my 2014's upper right cover which is blue. It is the cover held on with 3 screws and 2 plastic push pins. Has anybody replaced a cover? I don't know if I just need to order a cover (23P-2842N-00-P5 ) or do I also need to order the emblem and the 2 decals? Thanks for your...
  6. J

    Big ADV bike comparison

    I was disappointed to see how the Tenere fared in this comparison. http://www.motorcycle.com/shoot-outs/2018-big-bore-adventure-touring-shootout-part-1-street
  7. J

    2014 Super Tenere No Longer For Sale

    2014 Super Tenere non ES, 28000 miles, Major service just done, valves adjusted, air cleaner, oil and filter, spark plugs, has the higher amp YTZ14S battery, Seat Concepts low seat. I bought this bike for our cross country touring and it worked great (love that cruise control) but my wife has a...
  8. J

    What are these?

    I am defarkeling my 2014 Tenere to prepare it for sale. In my box of goodies that came with the bike I found these 2 parts. I do not know where they go or even if they are for a Tenere. Please tell me what they are if you can. They appear to be some sort of handholds.
  9. J

    Cam chain tensioner will not release

    Adjusted valves on my 2014, reinstalled and timed cams for which I could have used some more hands and am now trying to get the cam chain tensioner to release the plunger and push on the chain tensioning blade. It seems to release easy on the bench, but not on the bike. According to the manual I...
  10. J

    Weight Savings by switching silencers

    I tried a few searches but did not find the answer. Has anybody weighed the stock silencer and an aftermarket silencer and can tell me how much weight can be reduced by switching?
  11. J

    2011 BMW R1200GS Low model SOLD

    SOLD This is the hard to find low suspension model. It is just what the inseam challenged needs in a dual sport/touring bike. It has the cross spoke wheels that use tubeless tires, switchable ABS, heated grips, BMW Vario panniers, handguards, side windscreens, BMW low seat with the Seat Concepts...
  12. J

    Service Manual for 2014 BOUGHT ONE

    PM me with price if you have one to sell Never mind, I have one now
  13. J

    Wanted: Stock Tenere Handlebars for my 2014

    Subject line says it all, want some stock handlebars. PM me with price including shipping to Albuquerque 87114.
  14. J

    2011 R1200 GS Low Suspension Model

    2011 R1200GS "Camhead" You say you want a GS but you’re inseam challenged? This is the hard to find low suspension model. It has the extra price spoke wheels that use tubeless tires, switchable ABS, heated grips, BMW Vario panniers, handguards, side windscreens, Seat Concepts low seat, the BMW...
  15. J

    SOLD Sargent Seats

    Sargent seats front and rear. I bought these a few months back from a forum member for my 2014. I think Sargent seats are for someone heavier than my 160 pounds. I used these to ride to the start of the Iron Butt Rally in Minneapolis this summer riding 5-600 miles a day. They are much better...
  16. J

    metal valve stems

    I thought I would install an angled metal valve stem on the rear wheel while I am changing the tire. I have several types but the opening in the flange for spokes where the valve stem goes is not wide enough to allow any of these valve stems to seat against the rim. A search revealed a few posts...
  17. J

    Stock seat or seat pan

    Need a seat pan for an experiment
  18. J

    Dry Sump??

    I have seen the Tenere engine referred to as a dry sump engine on this forum. I see no separate oil tank, no oil in the frame, no sump extension below the engine and there does not seem to be a scavenge oil pump to return oil to the sump. It looks like every other engine that has a wet sump. Is...
  19. J

    WTB: Seat Concepts Low Seat or ? Never Mind, bought a new one.

    Looking for a lower seat and don't feel like doing a custom seat yet. I am using a Sargent but the shape is not right and the foam is too hard. Anybody want to sell a Seat Concepts low seat? I am also open to something different, let me know what you have.
  20. J

    Where is the outbox for Personal Messages?

    I have done a search for Outbox and found a post from 2011 that says to set my profile to save messages. I checked that setting. I have checked the box to save messages when I create them but I cannot find Outbox or Sent Messages under My Messages. Should replies to PMs also show up in the...
Top