Yes! That's the one. I will order a new one and then buy a socket to fit and torque to 94 ft/lb. In the meantime, with
my slip pliers, I was able to tighten bolt approximately another 1/8th turn. Rode the bike for about 150 kms and only
heard a slight thump once. I'm very happy and thank you.
Just back from the garage. Found the bolt and it is very tight and bracket has no cracks. When I was reinstalling the plastic parts I had removed from the headlight area, I touched the large 25 ml nut on top of the steering head and it moved. I removed by hand and reinstalled it, tightening it...
Not sure where the tower bolt is. I'm not too familiar with this bike yet.
Tried both helmets (full face and 3/4) and even without a helmet et for a short ride. Noise is coming from steering head area for sure.
Noise occurs when crossing a small bump at very slow speed. Steering head bearings are tight. Bike ridden on pavement only and has only 20k miles. Have played with various suspension adjustments with no change. Clunk noise is intermittent, does 't happen regularly but often enough to wonder if...