lotecredneck's latest activity
-
LIf you use Paypal don't keep any funds in PP's hands and always pay "goods and services" through PP with a credit card. Do not let PP...
-
LHey guys, be aware of scammers. I got an email this morning wanting to know if I was still looking for a Sargent seat. He said a guy had...
-
Llotecredneck replied to the thread Dash filler - Install.If you need to change a bulb it surely will. The one he has will have to be removed to change a bulb. Not sure who made the one I have...
-
Llotecredneck replied to the thread Dash filler - Install.Mine was raw aluminum and I sprayed it with Plastidip. Three coats will do it and you can always peel it off if you want to change it...
-
Llotecredneck replied to the thread Deal on SW-Motech Evo pegs.Did you measure them from the top to the ground on each to determine thay were the same height? I have a 2nd gen and they are definitely...
-
Llotecredneck replied to the thread Dash filler - Install.Depends upon which filler plate you have. Mine is a flat piece that I drilled a hole on either side then drilled a hole in the upper...
-
-
Llotecredneck replied to the thread SOLD*** Seat Concepts Low Seat.I'm open to reasonable offers.... ~Tony
-
Llotecredneck replied to the thread SOLD*** Seat Concepts Low Seat.I found it used, so I wouldn’t have any idea on wait times. ~Tony
-
Llotecredneck replied to the thread SOLD*** Seat Concepts Low Seat.It is definitely much better than the stock seat. It's wider at the back and the foam is more firm than the original. ~Tony
-
Llotecredneck replied to the thread SOLD*** Seat Concepts Low Seat.Here's a photo from the back of the seat so you can see how low it actually is...
-
-
Llotecredneck replied to the thread SOLD*** Seat Concepts Low Seat.Yes, I don't think they could make a lower seat than this one... This is approx 1 1/2" lower in the seating area than the OEM seat. ~Tony
-
LI bought a couple of seats and decided to keep the Laam seat and sell this one. This seat is the low version on a Seat Concepts pan so...
-
-
Llotecredneck replied to the thread Deal on SW-Motech Evo pegs.It does make a difference. I have mine all the way down and one step forward in the picture. ~Tony
-
LI was looking for some adjustable pegs for my T12 to lower them a touch to take the strain out of old knees. I ran across the SW Motech...
-
-
Llotecredneck replied to the thread Rox risers for 2018 ST.It is most likely for a Ram Ball to mount....
