Cleveland has been closed for the past month with the rains so not much local riding.
ADVrider has been a great resource for rides in So Cal, I have joined a few of them. The groups I have gone with have all been great help to a noobie like me.
Installed my kit today, tight space for big hands.
I had to rotate the left bulb counter clockwise about 30 degrees to get the light output even. I modified the little plastic piece to hold the bulb in the new possition. The wires are at 2:00 on the right and 12:00 on the left.
The...
I got my Dakar E07's through revzilla.
I guess my question is why would you not? Save a couple of bucks? How much will it cost you if you rip a sidewall? Confidence is worth the little extra for me.
I'm 300 lbs and I swapped out for the heaviest race tech spring they had. It made a huge difference in the overall ride. The stock front springs are fine when you have the right back set up. The front can be dampened just right stock, the back is about 2 imaginary "clicks" away from perfect...
Put on a $20 kill switch from cycle gear and "looped out the fuse" as described in this thread. I now have a "Trail Mode" without ABS. Took about 30 min. Everything works but the ABS in Trail Mode.
Rode HB to Silverado canyon, up maple springs to main divide, down Indian truck trail to i15, Ortega to the 5 then back to HB.
124 miles with 75% of the ride time spent on the dirt. I am cooked.
Wow, so much to say. First, the seat I received is only about 3 degrees flatter than stock out of the box so I had to do the seat mods. Next after only 50 or so miles the rubber bumpers were all destroyed so I replaced them with stock ones I had. I was disappointed about how small and soft...
Got mine today, I am going to start with the new seat modded down in the back. It is much firmer than the OE and that is big for me. I will update when I get some miles on it.
I have a 2015 S10 and based on the pro taper site I don't see how all the crap will fit on the adventure high bar grip space. Could someone please prove me wrong with a picture because I really want these bars.
Thanks much.
::006::
I did a combination of about five of these threads. I am 6'5" so i did not want to lower anything. What I did was take the 7/8 inch rubber stoppers mention and referenced earlier and put them on top of the "front" 2 bumpers with a washer as support. I put three washers under the seat clip as...