Thanks, this one really contradicts what is being instructed in the video from @Squibb (Thank you!) The Video instructions make more sense to me so far.
Hello there,
After tip over I have an issue with steering bar off alignment for about 15 degrees (quite noticeable).
Have anybody aligned the bar? For which bracket should I loosen the bolts, upper bolts (green A) or lower bolts (green B) on the picture below?
@magic regarding the covers on the right side, where the battery is, were you able to remove both covers (upper and lower)?
I tried yesterday, but could manage to remove only lower plastic cover (to do this I had to remove screws from the upper plastic), but the upper cover stayed there and...
Tried the central stand approach, but for this model ABS is off after the key is turned "ON".
So, I had to turn the key "ON", start traveling for at least 10km/h (6mi/h) to start the ABS (light goes off). Then put on central stand, while engine is idling. Second gear - TCS indicator starts...
Thank you @Propsoto
By the way, I used the cad file (sent it my dad and he produced a pair of these) then bolts, washers, nuts and it holds as never before. I did not paint them.
There are 4 mounting points on the frame with M8 bolts through Ø18 and Ø22 tall spacers.
The load should not exceed 13lbs (6kg).
You can judge the mounting pattern by this instructions sheet https://www.yumpu.com/xx/document/view/49822823/sra2101-kra2101-givi
Hi @HeliMark
Have installed the upper bars just yesterday. I strongly believe, that these bars will prevent installation of the aux lights right under the OEM ones. By saying that I mean, that the installations, like on the pics, won't do.
I will use bars clamps kits to install additional lights.
Here are my findings. I have not order any of these yet.
http://electricalconnection.com/index.php/product/yamaha-super-tenere-accessory-connectors/
https://sunrising-elec.en.alibaba.com/product/60094264197-221466054/male4_pin_waterproof_wire_connector.html...
Hey there,
The one I have is this one from GIVI Outback 58L Top case. It can hold two full size helmets, the case is big and quite suites the size of ST.
Here are some pics https://goo.gl/photos/EqsjqXFEnJeDtTAm6.
@tomatocity, did you see the pics at http://www.altrider.com/index.php/product/detail/pid/1561/cid/1
won't these be enough to judge about placement of a light bar?
These upper bars went quite long time evolution from two mounting points to four, which adds up strength to the cage. I am expecting upper bars to arrive soon along with lower ones and some other things.
On the pictures they look so much attractive, will see when installed.
Has anyone installed...