Yamaha Super Tenere dash filler panels.
New batch available 6/12/21.
Now with bolts available (3.00 add) and edge trim, while it lasts.
See last post/update in this thread.
=========
Mount your accessory plugs, USB ports, SAE charging ports, light switches, clocks, control modules, etc. Phone holders, etc. Strong enough to mount anything you can bolt into it.
Greatly reduces wind blast up through the faring and gives a finished look to the area. Also strengthens the faring by tying the left & right together, allowing you to mount lights or other heavier accessories outside the faring with the two holes on each side.
It's no problem changing headlight bulbs with this in place, Ive changed mine several times with it in place.
Made from .050 6061 aluminum.
They are not cut with hand/tin snips. These are machined on a Bridgeport verticle mill, go through several processes, deburred, then hand finished & painted.
They fit Gen2, and Gen 1.
To install:
Turn the bars.
Drop one end down in the area until the other end will drop down in.
Move it up into place.
Line up the 4 holes put your bolts in (lock nuts recomended) and tighten. 5min or less.
Nothing to remove or alter.
You can double up usage of these holes with your wind deflectors, etc. It serves to strengthen the mounting for these
$48.00 plus shipping 7.95 (Priority 2 day) to the Continental U.S.
$55.95 shipped.
3.00 add for stainless button head Allen bolts and lock nuts.
To purchase: Send a message with your complete shipping address.
I'll send you our Paypal info, when payment is made, I'll send you a pic of the shipping label / tracking # as soon as we print them, and itll be on it's way to you Priority 2 day.
They are painted flat black. Unless you want satin black, or left unpainted so you can paint it yourself. Please specify.
Sent from my SAMSUNG-SM-G930A using Tapatalk
New batch available 6/12/21.
Now with bolts available (3.00 add) and edge trim, while it lasts.
See last post/update in this thread.
=========
Mount your accessory plugs, USB ports, SAE charging ports, light switches, clocks, control modules, etc. Phone holders, etc. Strong enough to mount anything you can bolt into it.
Greatly reduces wind blast up through the faring and gives a finished look to the area. Also strengthens the faring by tying the left & right together, allowing you to mount lights or other heavier accessories outside the faring with the two holes on each side.
It's no problem changing headlight bulbs with this in place, Ive changed mine several times with it in place.
Made from .050 6061 aluminum.
They are not cut with hand/tin snips. These are machined on a Bridgeport verticle mill, go through several processes, deburred, then hand finished & painted.
They fit Gen2, and Gen 1.
To install:
Turn the bars.
Drop one end down in the area until the other end will drop down in.
Move it up into place.
Line up the 4 holes put your bolts in (lock nuts recomended) and tighten. 5min or less.
Nothing to remove or alter.
You can double up usage of these holes with your wind deflectors, etc. It serves to strengthen the mounting for these
$48.00 plus shipping 7.95 (Priority 2 day) to the Continental U.S.
$55.95 shipped.
3.00 add for stainless button head Allen bolts and lock nuts.
To purchase: Send a message with your complete shipping address.
I'll send you our Paypal info, when payment is made, I'll send you a pic of the shipping label / tracking # as soon as we print them, and itll be on it's way to you Priority 2 day.
They are painted flat black. Unless you want satin black, or left unpainted so you can paint it yourself. Please specify.
Sent from my SAMSUNG-SM-G930A using Tapatalk