14kmtnman
Well-Known Member
I am getting gas in the oil again. Last time was 2 years ago. At that time I replaced both injectors which solved the problem for about 2 years and 10,000 miles. The old injectors (original ones) show 12.8 ohms. The Factory manual states they should be at 12 with no range given. Do they really need to be exactly at 12? Shouldn't there be some leeway? I found a fuel injection cleaner place, that for $20 each, will clean & inspect the original ones I still have. Once I get that report back, I'll decide if I just put them back in to replace the current ones or get new ones. Is there something else I should be looking at or for, before I tear everything apart?