Author Topic: Relocated Puncture Outfit Farkle  (Read 3229 times)

Offline Scuff

  • Jr. Member
  • **
  • Posts: 54
Relocated Puncture Outfit Farkle
« on: July 13, 2013, 03:13:28 pm »
Having a bit more time on my hands from work, I managed to get some measurements done and worked out where I could mount the Peli 1120 case under the right hand panier.

It is very sturdy mounted here and there is less risk of damage. The brackets were made with some old pieces of metal that were being thrown away, and fashioned with basic tools such as a dril and a sledge hammer  ??? . A few 5mm bolts and nylock nuts hold it all in place.
















Scuff

Have a browse of some of my images
My flickr page

Offline tomatocity

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 5176
Re: Relocated Puncture Outfit Farkle
« Reply #1 on: July 13, 2013, 04:44:02 pm »
I like it! If I was to back up four months I would do what you did. The other option has a rear entry though it is not an easy access. The OEM side case comes off easy and gives you easy access. Have you considered installing two cables to hold the door open at 90* and make it a work shelf?
Tim
2015 Yamaha Super Tenere, XTZ12EFCR, Candy Red, #112, 5/23/2015
2005 KLR685
2012 Yamaha Super Tenere, XTZ1200, Impact Blue, #027, 7/31/2011 (sold)

Offline Scuff

  • Jr. Member
  • **
  • Posts: 54
Re: Relocated Puncture Outfit Farkle
« Reply #2 on: July 13, 2013, 05:25:46 pm »
I like it! If I was to back up four months I would do what you did. The other option has a rear entry though it is not an easy access. The OEM side case comes off easy and gives you easy access. Have you considered installing two cables to hold the door open at 90* and make it a work shelf?


Hi Tim


The lid has a firm stop as shown, but its just over 90 deg. Good idea, I'll have a look at that.
Scuff

Have a browse of some of my images
My flickr page

Offline hojo in sc

  • Full Member
  • ***
  • Posts: 230
    • Maps driven in
Re: Relocated Puncture Outfit Farkle
« Reply #3 on: August 27, 2013, 09:56:54 pm »
Very nice, do you think the 1150 would fit?

Offline Scuff

  • Jr. Member
  • **
  • Posts: 54
Re: Relocated Puncture Outfit Farkle
« Reply #4 on: August 28, 2013, 03:17:00 am »
Very nice, do you think the 1150 would fit?


I chose the 1120 because the depth would help it fit between the OEM panniers and the rear caliper. I think the 1150 would be a little too large for this application.
Scuff

Have a browse of some of my images
My flickr page

Offline hANNAbONE

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • Posts: 1453
  • ...Patiently Waited...
    • Bahnsturmers M/C Club
Re: Relocated Puncture Outfit Farkle
« Reply #5 on: August 28, 2013, 08:20:01 am »
sah - Lick...
hANNAbONE
'12 Yammy SinisterBlack Supa10
...where 421 and 50 kiss...
* veho tutus, meus frater *

Offline rem

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4492
  • A man who don't lie, ain't got nothin' to say.
Re: Relocated Puncture Outfit Farkle
« Reply #6 on: August 28, 2013, 06:59:27 pm »
Mighty tidy.   R   ::008::
2012 Yamaha Super Tenere XT1200Z (Deceased)
2013 Yamaha Super Tenere XTZ12BB
DieHard
2012 First Annual Super Tenere Rally - Whitehorse, Yukon

Offline Buellieboy

  • Newbie
  • *
  • Posts: 1
Re: Relocated Puncture Outfit Farkle
« Reply #7 on: November 28, 2014, 08:10:00 am »
Don't suppose you'd be interested in making/selling the mounting brackets and hardware minus the pelican....? I have some mechanical skills, but not metal fabrication. I have SW-Motech EVO quick release side carriers, can provide measurements. I'm a forum nube, so if intetested let me know how to proceed.

Offline tomatocity

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 5176
Re: Relocated Puncture Outfit Farkle
« Reply #8 on: November 28, 2014, 08:34:51 am »
 ::026::
Tim
2015 Yamaha Super Tenere, XTZ12EFCR, Candy Red, #112, 5/23/2015
2005 KLR685
2012 Yamaha Super Tenere, XTZ1200, Impact Blue, #027, 7/31/2011 (sold)

Offline Brick

  • Hero Member
  • *****
  • *
  • *
  • Posts: 874
Re: Relocated Puncture Outfit Farkle
« Reply #9 on: November 28, 2014, 04:49:08 pm »
 ::026::
I would love to have that for my 2014ES... hmmm... suppose it would fit there? I don't have the Yamaha bags but I think it could work... I think that the bracket you made would be the same for my bike... If you don't want to make the bracket could you just take it off and take some measurements? Or trace around it on graff paper?

BTW: Great job!

'14 ES Yamaha Super Tenere'
'99 SV-650
'15 FJ-09
Wanna see where I'm riding?
http://tinyurl.com/3a343vx
www.ridemsta.com

Offline yoyo

  • Sr. Member
  • ****
  • Posts: 340
Re: Relocated Puncture Outfit Farkle
« Reply #10 on: January 04, 2017, 02:27:19 pm »
Following this one, I'll never find it again if I don't comment on it!

Sent from my SM-G930F using Tapatalk


 

Related Topics

  Subject / Started by Replies Last post
37 Replies
5285 Views
Last post May 02, 2013, 04:50:53 pm
by HoebSTer
7 Replies
1935 Views
Last post July 20, 2013, 11:12:57 am
by sportsguy
14 Replies
2112 Views
Last post July 09, 2015, 09:33:58 am
by greg the pole
9 Replies
998 Views
Last post February 10, 2017, 07:25:15 pm
by Pterodactyl
1 Replies
206 Views
Last post July 13, 2017, 12:18:53 am
by Defekticon