What you did to your Tenere today??!!

ZigZag

Member
Joined
Mar 20, 2024
Messages
50
Location
Adelaide, South Australia
I know, do a search…

Is this bracket I need for mounting a Garmin GPS on the accessory crossbar?

What year is your S10? I believe the Gen 1 bikes had a thinner cross bar. Someone on here will be able to confirm that. If your bike is later than 2014 (Gen 2) and you don't have these,
Ladlesport stabiliser brackets I'd be getting some too. I mounted my GPS on the accessory crossbar and it wobbled around all over the place to the point it was hard to read. Ladlesport's brackets sorted that very easily.
 

Fordf350

Well-Known Member
Joined
Oct 29, 2019
Messages
178
Location
Pinehurst Texas
Unfortunately, had to put her back on battery tender. Wife, kids, mother in law everybody needs something. Don’t they realize I should be riding. The only ones more important than riding are my two grandkids. Rant over.
 

Sierra1

Well-Known Member
Joined
Nov 7, 2016
Messages
15,101
Location
Joshua TX
Wife doesn't even try to interrupt my routine anymore, although she will bitch about it later. The kids are on their own and have their own bikes. The grandchild would be the only one with the ability to interfere with a ride, but he only visits in the evenings or weekends.
 

Boris

Well-Known Member
Joined
Dec 21, 2013
Messages
2,105
Location
midlands. UK
What year is your S10? I believe the Gen 1 bikes had a thinner cross bar. Someone on here will be able to confirm that. If your bike is later than 2014 (Gen 2) and you don't have these,
Ladlesport stabiliser brackets I'd be getting some too. I mounted my GPS on the accessory crossbar and it wobbled around all over the place to the point it was hard to read. Ladlesport's brackets sorted that very easily.
Gen1 bikes don’t have a crossbar…….mines doesn’t, I presume all pre 14 bikes don’t.
 

bimota

Moderator
Staff member
Global Moderator
Joined
Dec 10, 2017
Messages
6,754
Location
bridgend, Wales, UK
yep gen 1 bikes don,t have a cross bar 2010 -13 that cross bar on the gen 2 2014-23 is the bracket that was put on the gen 2 to hold the different screen, its the gen 2 screen bracket holder


rob
 

bimota

Moderator
Staff member
Global Moderator
Joined
Dec 10, 2017
Messages
6,754
Location
bridgend, Wales, UK
So is it strong enough and safe enough to mount a GPS to it do you think?
if you are asking is the gen 2 cross bar strong enough to mount gps to then yes alot have done this but most buy the 2 after market stabilizer brackets that are sold buy some one on here to strengthen it

rob
 

ZigZag

Member
Joined
Mar 20, 2024
Messages
50
Location
Adelaide, South Australia
if you are asking is the gen 2 cross bar strong enough to mount gps to then yes alot have done this but most buy the 2 after market stabilizer brackets that are sold buy some one on here to strengthen it

rob
Thanks Rob, that is what I meant. I have fitted the stabiliser brackets and they have made a huge difference to the stability of my GPS unit.
Dom
 

whisperquiet

Well-Known Member
Joined
Feb 20, 2011
Messages
742
Location
Southern Illinois
What you did to your Tenere today??!!
I mounted a lightly used front Bridgestone BattleWing that was given to me by TenereGuy and re-installed my OEM rear Bridgestone that only has 600 miles on it for an upcoming MSTA rally next week in Eureka Springs, AR. The bike was washed and detailed…….my ‘23 S10 just turned 10,000 miles in eight months.
 

bimota

Moderator
Staff member
Global Moderator
Joined
Dec 10, 2017
Messages
6,754
Location
bridgend, Wales, UK
took my bike a hour away 2 weeks ago to get the McCRUISE fitted collected yesterday McCRUISE fitted all set up and calibrated rode home bloody orange engine warning light came on stayed on all the way home, so today had a hours ride to take the bike back with the light coming on again 10 mile down the road, gutted the bike road lovely the cruise was working perfect to superb,
emailed McCRUISE to see if they can help with whats gone wrong just gutted thats the bike gone again

rob
 
Top