B
ballisticexchris
Guest
I started my LED light install:
What you did to your Tenere today??!!
- Thread starter biting_point
- Start date
Seabee-ken
New Member
- Joined
- Jun 21, 2019
- Messages
- 7
Finished up my rack. I made it the same height as the deck under the rear seat. Next project will be a matching plate for under the seat that incorporates a back rest for the really long rides.
Attachments
new decals 3D fitted
Attachments
jeckyll,Oil change ahead of trip, new shock sox and figured out why my aux plug didn't work
Would you mind showing me the link to the exact Shock Sox you use/bought?
Thanks in advance.
Of course.
Shock Sox 37-50mm Fork Tube 6" Black UP/DWN FORK
Dug through my amazon history, these are the exact ones: https://www.amazon.com/gp/product/B0041CC4N4/
SkunkWorks
Well-Known Member
Decided to go a different route regarding tires.
Going to try this one on the rear and see how I like it.
Going to try this one on the rear and see how I like it.
Chunky!
Fitted an APE manual camchain tensioner to my Gen 1.
Didn't need the new clutch cover gasket, didn't lose a drop of oil (it was on the sidestand) and I think the biggest mistake I made was test riding it afterwards without earplugs in!
Seemed like a pretty simple job.
Didn't need the new clutch cover gasket, didn't lose a drop of oil (it was on the sidestand) and I think the biggest mistake I made was test riding it afterwards without earplugs in!
Seemed like a pretty simple job.
tntmo
Well-Known Member
Fork seals and fresh oil. Made a video, will be on YouTube soon. I should have ordered bushings as well, there was some wear and I am going to have to pull them apart again to replace the bushings. 45,000-ish miles on the bike, so if you are getting some miles on the bike it probably makes sense to get the parts and do it all at once.
Madhatter
Well-Known Member
had valves checked at 31k, all in spect….. just gotta love Yamaha...
Tenman
Well-Known Member
Did some backtracking looking for my Givi topcase on the side of the road. When I got home it was on the porch
Boris
Well-Known Member
That made me laugh, cheers.
WJBertrand
Ventura Highway
So had you left it there from the start, or did someone find it (and some information inside) and work out where to return it?
Sent from my iPhone using Tapatalk Pro
Tenman
Well-Known Member
Never put it on. I'm gettin senile
Tenman
Well-Known Member
reform school for you. Bad boyWhen I was a kid we use to steal cars and return them to the owners driveway. It was a blast messing with their mind. The antics of a 12 year old.
SkunkWorks
Well-Known Member
Checked all the spokes..................none of them were loose. Bike has 13,XXX miles on it now.
Swapped the Garmin Zumo Cradle off my FJ1200 to the Tenere. The Cradle that was on there failed. (came on the bike when I bought it)
Fixed the DS tool-box front mount bracket.
Then went riding!
Swapped the Garmin Zumo Cradle off my FJ1200 to the Tenere. The Cradle that was on there failed. (came on the bike when I bought it)
Fixed the DS tool-box front mount bracket.
Then went riding!
SkunkWorks
Well-Known Member
The Mitas E-07-plus was just about done, so I swapped it out last night.
Took me a little less than an hour, start-to-finish.
Took me a little less than an hour, start-to-finish.