Ok didnt know that.
What you did to your Tenere today??!!
- Thread starter biting_point
- Start date
RogerRZ
Well-Known Member
Installed a bit of light, for those dark nights.
These do look nice! Do they stay in place? How are you liking them?Put highway pegs on, first time I’ve ever had highway pegs and they are a game changer.
Sent from my iPhone using Tapatalk
They look nice what ones are they ?
I guess you can buy these on aliexpress....I have seen several models
Search for "highway footpegs"
PineLaneRider
Well-Known Member
Washed all the limestone mud off from my ride last Saturday. Installed my T-Rex highway pegs. What a great piece of kit! $125 directly from T-Rex.
Attachments
WJBertrand
Ventura Highway
Curious about those highway pegs. Where did you get them?
PineLaneRider
Well-Known Member
As it says in my post, directly from T-Rex Racing. Measure you crash bar diameter, they have 2 different sizes. They also come with long and short drop legs. Lots of adjustment.
TRex Highway Pegs
TRex Highway Pegs
I love them!!! Got them off revzilla. Staying in place is a bit of an issue. Still working on the best solution. But they are VERY comfortable!
Sent from my iPhone using Tapatalk
Nice!!!
They tend to rotate when you rest your feet on them, right?
What have you already tried to do? Maybe a piece o rubber beetween the rest and the crash bar?
WJBertrand
Ventura Highway
Thanks, I read over that like 3 times and still missed it. I’ve ordered a set.
Sent from my iPhone using Tapatalk Pro
14kmtnman
Well-Known Member
Got the new Mefo tires today. They appear much more aggressive than the Shinko 804/805's I ran a few years ago (last picture). It might be another month or 2 before they get mounted. I shouldn't have any off road traction issues...... they will replace Mitas E07+ rear (about 6000 miles) and E07 front.
Attachments
Last edited:
Right now I have 3 layers of roll pipe in there held perfectly for about 1000 miles now the right one is a touch loose.
The issue is they are much to big for the bars. I also ordered light mounts that include the rubber adapters to put inside with different thicknesses as needed, haven’t tried them yet but will probably do that soon.
Sent from my iPhone using Tapatalk
hi,
i,m interested in a set of these i take it you ordered the 25mm ones for the altrider bar and the t-rex 25mm is still to loose on the bar
i,m asking as my altriders have been powder coated and are a bit thicker
cheers
rob
PineLaneRider
Well-Known Member
I got the TRex highway pegs for my Alt Rider crash bars and they tighten up like they should. No movement. I don't think the loose ones are TRex, they're Amazon or Ebay.
They have a 1 1/4 inch clamp. It is very loose on my givi bars. That’s the reason for so many layers of the plastic pipe. Will try to get a close up for you tomorrow. If they come in a smaller diameter that would be better, that being said if there is a smaller clamp size there would be enough adjustability to accommodate powder coating.
Kuryakyn Longhorn Offset Trident Dually Highway Pegs | 14% ($32.43) Off! - RevZilla
Kuryakyn has combined their most popular highway peg components into one product to provide long-haul comfort. Easy-to-install hinged clamps mount on …
www.revzilla.com
Sent from my iPhone using Tapatalk
Johnwesley
Well-Known Member
I had the issues with the ones on Holly’s bike. I ended up with a metal spacer that still allowed slip even though it was tight. So I drilled through the clamp and tapped the crash bar. then run a bolt through to keep everything from moving.
Johnwesley
Well-Known Member
Went out and grabbed a pic for ya? The bolt goes through the clamp metal reduce and threads into the crash bar it self.
blågrisen
Well-Known Member
My trusted old cheap plastic toolbox used as top box sadly cracked after being used on three consecutive bikes.
No more silhouettes of ridden race tracks though. Bummer.
Luckily some after Christmas sales landed me a Givi Dolomiti of about the same size, detachable and lockable as a bonus.
XT specific plate.
Givi Dolomiti 30L
No more silhouettes of ridden race tracks though. Bummer.
Luckily some after Christmas sales landed me a Givi Dolomiti of about the same size, detachable and lockable as a bonus.
XT specific plate.
Givi Dolomiti 30L
That’s a great idea! I might resort to thatWent out and grabbed a pic for ya? The bolt goes through the clamp metal reduce and threads into the crash bar it self.
Sent from my iPhone using Tapatalk