AtisoDangKhoa
New Member
i want to know what is worth removing from Dirt_Mom's 2012 and keep for the anticipated 2019 bike.
thanks you biker <3 <3 <3
thanks you biker <3 <3 <3
What accessories 2012 fit the 2019 models?
- Thread starter AtisoDangKhoa
- Start date
MIKE R
Well-Known Member
All the extras I had on my 2011 & 2013 bike transferred to my 2015.
I like the effectiveness of the Givi AirFlow on my Gen 1st that I transferred it to my Gen 2. All that was required was the removal of the screen holding brackets and a small spacer on the 2 lower mounting bolts.
All other extras were a simple fit including the winglets although this might be due to removing the original screen and its mounting hardware.
You can see most of the extras on the attached pictures. Picture 1 is my 2013 Gen1 and 2 is my 2015 Gen 2 (I like the colour and livery!)
Hope this helps
Mike
I like the effectiveness of the Givi AirFlow on my Gen 1st that I transferred it to my Gen 2. All that was required was the removal of the screen holding brackets and a small spacer on the 2 lower mounting bolts.
All other extras were a simple fit including the winglets although this might be due to removing the original screen and its mounting hardware.
You can see most of the extras on the attached pictures. Picture 1 is my 2013 Gen1 and 2 is my 2015 Gen 2 (I like the colour and livery!)
Hope this helps
Mike
Attachments
Cycledude
Well-Known Member
From my previous 2013 I transferred panniers, top box, Yamaha crash bars, Givi tank ring mounted tank bag, Yamaha skid plate, everything was an exact fit on the new 2018.
The 2013 winglets were a little to long so I used a air powered cutoff wheel to shorten the front about 1.5 inches and they fit very nice, most folks wouldn’t even be able to tell they were cut.
The 2013 winglets were a little to long so I used a air powered cutoff wheel to shorten the front about 1.5 inches and they fit very nice, most folks wouldn’t even be able to tell they were cut.