Stock 2nd Gen (2016) non-ES ride height measurements

GSequoia

Active Member
Joined
Feb 27, 2019
Messages
173
Location
Torrance, CA
Anybody got measurements handy for a bone stock 2016 non-ES model handy? Since I bought the bike from a dealership I had no contact with the previous owner. I'd like to check to see if it's been lowered as I've already seen evidence he was shorter than I am (seat in low position, Madstad windshield is a shorter one).

Thanks
 

HeliMark

Well-Known Member
Joined
Dec 18, 2013
Messages
995
Location
Tennessee
I have a Gen 1, but I believe for the non ES, it is the same.

Seat height: 33.3" (845mm) low, 34.3 (870mm) high.
 

escapefjrtist

Searching for Dry Roads
Joined
Sep 5, 2010
Messages
1,418
Location
Snohomish WA
Couple easy checks for you. First, mentioned previously, see if the forks are close to flush with the top clamp. Second, check dog bone length, from my '12 non-ES they are ~4" center to center.

~G
 

GSequoia

Active Member
Joined
Feb 27, 2019
Messages
173
Location
Torrance, CA
Couple easy checks for you. First, mentioned previously, see if the forks are close to flush with the top clamp. Second, check dog bone length, from my '12 non-ES they are ~4" center to center.

~G
Thanks. Forks are flush with the top clamp, I'll check the dogbones when I have light.
 
Top