Retainer for Crossover Brake Line

[nga]

I thought I read a thread about fixing the retainer for the crossover brake line, but I can’t find it. My retainer is not holding the brake line like it was designed - see pics.

Is the solution to purchase a new retainer or is there some other way?

Thank you.

Sent from my iPhone using Tapatalk

 

[Paul466]

Hi NGA! My way of resolving this issue was to insert the break line holder back in and loop small zip tie thru it under the fender. Hope this helps. Sorry no pics.

 

[BWC]

The quickest and simplest would be to replace it.
If you want to remove the fender, and the ears on the retainer pin are in good shape you can add a small washer to the inside of the fender. It tightens the retainer a bit but still allows it to pivot.

 

[nga]

Great, thank you both!

 

[limey]

You have to be careful with the retainer mine brock when I bottomed out the suspension and the brake line ended up under the fender and locked up the front wheel. I ended up tie wiring it to the down line.