Help with Touratech seat!

klingklang

Active Member
Joined
Oct 26, 2016
Messages
136
Location
Quebec, Canada
Yes, the bracket move side to side. Under the nut you will also notice that the holes are ovals. For some reason, the one on the right is less oval, mean smaller. It is just aluminum. It is easy to remove some if you need to.

Here is the little spacer I did. I installed it between the seat pan and the steel bracket.


20220829_071156 (Small).jpg
 

Longdog Cymru

Well-Known Member
Joined
Jul 21, 2018
Messages
1,665
Location
Swansea, Wales, UK
There was a little trial and error mind, I even swapped the latch from the Yamaha seat and concluded that it was the Touratech seat base that was just slightly different to the Yamaha stock seat.
 
Top