moaralpha
Member
I have been trying to search for an answer and couldn't find it on this forum. I have the handguards off and can't seem if figure out how to get the bar ends off to slide the grips off. What gives!? Thanks in advance for the help!
Heated Grip Install Question
- Thread starter moaralpha
- Start date
bar end is just hel in by a bolt isn,t it
rob
rob
it may be loctite or corrosion but its surely just a bolt
www.fowlersparts.co.uk
rob
STEERING HANDLE & CABLE - Yamaha XT1200Z | Yamaha XT1200Z 2013 STEERING HANDLE & CABLE with fast delivery to United States | Fowlers Parts
Yamaha XT1200Z | 2013 | Bluish white cocktail 1 | Europe | STEERING HANDLE & CABLE with fast delivery to United States. Available at Fowlers Parts, the UK's No.1 Motorcycle Parts Supplier.
www.fowlersparts.co.uk
rob
Saint rob
Well-Known Member
Once the handguards are off the bar ends just unscrew out using a 10mm (I think) allen key in the end
moaralpha
Member
I see now, it's definitely bigger than a 10mm. Running to the auto parts store now. Probably a 12mm. It's a big one!
moaralpha
Member
Huge amazing news!
Its a 12mm.
Its a 12mm.
pic
guy on facebook has just loaded up on the tenere forum how to fit oem heated grips with pictures
rob
rob
Saint rob
Well-Known Member
I'm puzzled why anyone would fit OEM grips to their Gen 2's, Oxford grips work well and It's easy to make them appear on the dash using the menu and they are a fraction of the price.
You also avoid the issue of the right hand one causing total failure of both of them
Hi. Have you actually done this? General consensus is that it can't be done due to differences in resistance. If you have I would be grateful to know how. Many thanks.
Hi. Can't seem to find that. Can you direct me please.
yoyo
Well-Known Member
Here you go.
Sent from my ELE-L29 using Tapatalk
Sent from my ELE-L29 using Tapatalk
yoyo
Well-Known Member
Balls, that didn't work! If you search 'heated' in that group you'll find it.
Sent from my ELE-L29 using Tapatalk
Sent from my ELE-L29 using Tapatalk
Not sure what I'm doing wrong. Can't find a thread with pics of grip install. Help
Saint rob
Well-Known Member
Sure have, I did post something on here about it, I'll have a mooch about and see if I can find where I put it
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
T4ten just look down theres a thread about grips
rob
yoyo
Well-Known Member
There weren't any pics, there was a diagram of how ghe wires will go, it was in a reply to one of the comments.
Sent from my ELE-L29 using Tapatalk
the one above yoyo,
is showing how he wired them up to a silver tenere with about 9 pics the pic above that i put up is one of the pics of bar end removal
its KIM HANSEN thread
rob
is showing how he wired them up to a silver tenere with about 9 pics the pic above that i put up is one of the pics of bar end removal
its KIM HANSEN thread
rob
Thanks so much. I was looking on the wrong group, the 'adventure rider' one.
Saint rob
Well-Known Member
Found it!
Heated Grips
Just had first service today and dealer installed oem grips. Seem to work really well 
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
www.yamahasupertenere.com