Fitting Comms

[CraigM]

Hi guys

Im wanting to fit my Autocom to S10, and think the most obvious place to put it is under the seat. Problem is the wiring is all so neatly threaded through the bike that I'm not sure where the best place is to take the power from? I'd like it to be switched to the ignition ideally. Has anyone done this yet and have any advice please.

It was relatively simple on the FJR as you just had to remove the left hand side cover and air intake and you had loads of wires to choose from it was easy... 8)

 

[Bundu]

I installed an alarm on my S10 and cut into the cable that comes from the 3A fuse that powers the cigar lighter - It was quite easy to do

 

[CraigM]

Thanks Bundu. I'll have a look and let you know how I get on.

Cheers

 

[Combo]

You may want to try this. I purchased one for my ordered Big XT. Will give you 3 circuits. I purchased the 3 circuit with one unswitched.

http://www.easternbeaver.com/Main/Products/Fuseboxes/3_Circuit/3_circuit.html