Dashboard - Where to get or DIY measurements

GSequoia

Active Member
Joined
Feb 27, 2019
Messages
173
Location
Torrance, CA
Hello,

It seems that I can't find anybody currently selling dashboards for the Gen II Super Ten. Does anybody have a current source and, if not, perhaps measurements or a file with details handy? I can easily make one but it would save time to not have to start from the beginning (and even more time to just buy it!).

Thanks
 

Mak10

Well-Known Member
Joined
Aug 20, 2018
Messages
2,567
Location
SE Idaho
I’ll see if I can find the cardboard cutout/template I made. If you can wait I will cut one out of sheet metal and bring it to Death Valley.
 

fmpvet

New Member
Joined
Apr 28, 2019
Messages
9
Will this template fit the 2012 model? I am looking for one just like it to maximize the shelf.
 

GSequoia

Active Member
Joined
Feb 27, 2019
Messages
173
Location
Torrance, CA
FYI here is the dash I made mostly from the file @SigepKat posted. I need to knock down a couple high points on the arc (cut with a jigsaw) and get it powder coated or anodized but it works just fine.

I made it out of 1/8” aluminum plate then sanded it with 200 grit to cut the glare down and give it a half-asses brushed aluminum look.

D1E071BB-6707-460F-BAAB-290F49329236.jpeg

B769F53E-8328-4BC5-B92F-58C56C91666C.jpeg

40D82A83-7BFA-4242-AE20-04F57AAA7252.jpeg

77F3CD6D-81D2-4629-B462-C604D08BACA9.jpeg

Sequoia
 
Top