Cowl / Tank Stripes

[Chadx]

They're decals applied directly to the paintwork. They rarely do it properly these days

I believe they just go straight on to the top layer, same as your safety stickers all over the tank, hair dryer, patience, good polish, job done..

Thanks MortiisMachine and Swagger. Good to know for future reference. That opens up the ability to make a few unique changes much easier than if there was a clearcoat over them. For once, 'half azzed" pays off! Ha.

 

[colorider]

I believe they just go straight on to the top layer, same as your safety stickers all over the tank, hair dryer, patience, good polish, job done..

WD-40 or Goo-Gone works well too to remove any residual adhesive, then follow up with a good coat of polish.

 

[Chadx]

For decal removal, I've used a bit of heat when needed (hair dryer) and then rubbing alcohol, but I then found that the Bug and Tar remover (auto detailing product) takes off sticker residue slick as can be.

 

[HoebSTer]

just dont use a butane mini torch!!!!! Don't ask how i know this!!!!

 

[MortiisMachine]

just dont use a butane mini torch!!!!! Don't ask how i know this!!!!

Lol, would make a good video on YouTube though, in the how not to section!

 

[SpeedStar]

Lighter fluid is also good for residue removal if you don't have access to goo b gone or WD40 (since lighter fluid is so much more common these days, NOT). ;D

It does work well though, but don't strike a match near it.

 

[HoebSTer]

I talked to a lady who does the decals today. She said it is definately doable!!! This is all i know until i get the bike to get proper scaling and all. I will then be able to do different colors!! I am thinking black with a white outline and Yellow folowing the same contour.
I will let people know more as i go along. I will probably be doing the same on my saddlebags i think.

 

[Mike Sisson]

As noted before, I'd be interested in a set. Thanks for the foot work!

 

[HoebSTer]

Here are a couple of ideas I have once again thought about on the black bike, but it would work. One of the color schemes is for the bike, one is for the Yelllow Pelican saddlebags I may use.
Again, it is rough look, I only have the paint program on my computer.

Jeff

 

[Kevhunts]

Here are a couple of ideas I have once again thought about on the black bike, but it would work. One of the color schemes is for the bike, one is for the Yelllow Pelican saddlebags I may use.
Again, it is rough look, I only have the paint program on my computer.

Jeff

Jeff, It would be nice to incorporate some reflective element to those stripes. It's funny you mention the possibilty of using yellow pelican saddlebags.
I doctored this image a few weeks ago.

 

[HoebSTer]

Dont worry Kev, I am one for the reflective stripes. Plus since i may be going with the black blocks on the black bike, the reflective black vinyl decal is sort of charcoalish. It would stand out even in the daytime somewhat.

Jeff

 

[Mondo Endo]

Try Tapeworks .com.... they make grafics and stripe kits for bikes. I used a generic kit (yamaha block style stripe) on my FJR and a generic solid stripe kit on my 1250. They are automotive quality, wont peal or fade and you can order in any color. Pictures of my red Bandit 1250 with the stripes installed are on their customers bike section.

 

[martinh]

Jeff if you want stripes on the ST I'd wait till Wasp has them. The ones he made up on his bike look really good. They blend in with the lines of the upper fairing and tank. He is going to do them in different colors. Maybe he could also do it in a reflective vinyl.

 

[pqsqac]

I'm going the other direction and removing the factory decals they are ugly. I just want all blue paint showing I'm removing that nasty sticker on the tank as well.

 

[ptfjjj]

Vince, I agree. I will likely remove all stickers, unless I think I can't do it without scratching it. I always end up getting some kind of damage to one or more stickers or decals, and since I suck at putting them back on, I usually end up taking them all off any way. Trouble is, if you don't take them off right away as a precaution, the paint tends to fade around them and removing them later, after they get damaged, will leave a "ghost" image of the decal shape.

Of course, if that ends up happening, it will just give me an excuse to repaint and go with the zebra stripe motif shown on the concept video. ;D

 

[pqsqac]

Hey Paul I always debadge my bikes as they say but in this case I may leave the Yammi emblem and just dump the stickers. A hair dryer is a good way to heat up the glue to start the removal process. Just get a corner of it heated and start to peel away very carefully while hitting it with heat. A heat gun is actually the best way but you have to be very careful they can melt stuff quickly.

Vince, I agree. I will likely remove all stickers, unless I think I can't do it without scratching it. I always end up getting some kind of damage to one or more stickers or decals, and since I suck at putting them back on, I usually end up taking them all off any way. Trouble is, if you don't take them off right away as a precaution, the paint tends to fade around them and removing them later, after they get damaged, will leave a "ghost" image of the decal shape.

Of course, if that ends up happening, it will just give me an excuse to repaint and go with the zebra stripe motif shown on the concept video. ;D

 

[Waspworks]

Jeff if you want stripes on the ST I'd wait till Wasp has them. The ones he made up on his bike look really good. They blend in with the lines of the upper fairing and tank. He is going to do them in different colors. Maybe he could also do it in a reflective vinyl.

Wait no longer.... 8) - I posted info in the vendors section.

http://www.yamahasupertenere.com/index.php?topic=712.0

Greg.

 

[colorider]

Wait no longer.... 8) - I posted info in the vendors section.

http://www.yamahasupertenere.com/index.php?topic=712.0

Greg.

But we are still waiting for the pictures Greg!!! ;D

 

[Waspworks]

But we are still waiting for the pictures Greg!!! ;D

Yep, that is my mission for today. ;D

Greg.

 

[Buckeye56]

GReg,

I look forward t seeing the photos. I hope that you will allow yourself sometime to enjoy the weekend too. I want you to know, and I think I speak for all of us, just how much we appreciate all your efforts related to the Super Tenere. You thread on ADVrider is what convinced me that this is was the bike I wanted.

Keep up the good work, but don't let it burn you out!