Electrolyse
Active Member
When you mount and tighten the top panniers nuts, there is a HUGE gap on passenger foot pegs, 1cm on the right more than 2 on the left side.
BUMOT panniers ordered !
- Thread starter Electrolyse
- Start date
Electrolyse
Active Member
ok if i loosen all nuts and I tighten hard all nuts, it is working but as a technician, this is quite unusual, almost like an amateur mistake
SkunkWorks
Well-Known Member
You are supposed to have spacers there.
The instructions from Bumot says that if you do not have the original Yamaha luggage brackets attached to the passenger foot-peg brackets, then you need the spacer kit. (I believe I had to order it separately)
You could probably just get some spacers at a local hardware store.
Electrolyse
Active Member
Houuuraaaa I do love you !
I could not understand why such quality brand build those racks this way.
thank you much SkunkWorks
I could not understand why such quality brand build those racks this way.
thank you much SkunkWorks
Last edited:
Electrolyse
Active Member
Spacers received very quickly from bumot, they sent me 3 different sizes, I did not used the same size for left and right .. anyway it is finally done.
