Harry Dresden PI
New Member
Would these work with the Givi Ranks on the 2014 S10?
Aluminum raid toolbox for the Yamaha Super Tenere at ADV Motorrad!
- Thread starter rotaryracer
- Start date
Hi Harry - I believe DS Bike did get a raid box fitted behind GIVI racks, but it was with a specific set of brackets...the ones we have in stock for the OEM Yamaha bags probably wouldn't do the trick. Do you have the standard GIVI Monokey racks or CAM/Outback racks? I've got a nagging memory that the EU Monokey racks were somehow different than US racks, but can't imagine GIVI would make two different setups - may have been a version change? I'll see if I can get more info, but if you want to email some pics of your setup, I can see if we can match them up against what's been done before.Harry Dresden PI said:
Thanks!
Jason
Hi holligl - the door dimensions are 2 3/8" W x 4 1/4" H.holligl said:
Thanks!
Jason
Propsoto
Active Member
How waterproof is your box? I was hoping to secure a small handgun in it.
WJBertrand
Ventura Highway
Mine, with the second gen door, is very water tight. Never leaks washing it or in torrential rain the couple times I’ve been.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Grumpy
Getting old is not for wimps
My first gen. leaks, so I drilled a couple of small (.16") drainage holes in the lowest edge of the box with the bike on the prop stand.
WJBertrand
Ventura Highway
The Gen 2 door can be had separately and will fit the older boxes.Grumpy said:
Sent from my iPhone using Tapatalk Pro
Propsoto
Active Member
Do you have an ETA for black ones?
Hi Propsoto - we have more on order with the manufacturer in Spain but do not have an ETA at this time. I would assume at least 30 days or so, although I'm hoping it's less.Propsoto said:
Thanks!
Jason
Ibew_sparky
New Member
Are you still selling these? Have you had anyone install this with the Givi outback cases?
jwhuls
Always looking for adventure
How do I get the rear bolt out? It is one of those safety hex's.
WJBertrand
Ventura Highway
You need a T-50 Torx "security" driver. I found a 3/8" drive one at Lowe's for just a few bucks.jwhuls said:
https://www.lowes.com/pd/Kobalt-3-8-in-Drive-Tamper-Proof-Torx-Driver-Socket/3387608
jwhuls
Always looking for adventure
I appreciate you help and I got it all worked out. tool box is great little stash spot.
Also, rained for many highway miles. not a single bit of moisture in the box.
the second gen turn signal is in the way, but with the flex it isn't really an issue. plenty of room to insert the key.
Also, rained for many highway miles. not a single bit of moisture in the box.
the second gen turn signal is in the way, but with the flex it isn't really an issue. plenty of room to insert the key.
WJBertrand
Ventura Highway
Just put the door on upside down, no interference at all then.jwhuls said:
Thrasherg
Active Member
That’s what i did and it works great..WJBertrand said:
Rambler
Well-Known Member
Is this tool box still available ?
if not - what are the alternatives out there ?
if not - what are the alternatives out there ?
Have you tried a message to the vendor rotaryracer? It shows he hasn't been on here since June of last year.
Here's a link to ADVMOTORAD: BUMOT Defender Toolbox - XT1200Z Super Tenere (advmotorrad.com) Doesn't look like they carry the original one in this thread though. If they do, I couldn't find it. Looks like Bumont only now.
Rambler
Well-Known Member
I took a look at those - but says Bumont racks needed. I have SW Motech ones
I like the GIVI S250 - but running into the racks issue on that too.