ABS / Suspension Warning Light / Help

[Rambler]

Help Post:

Left ignition on (yes yes, dumb, I know). Battery ran down. Used a Battery Booster to jump start.

1. ABS light + Suspension Warning light stayed on.
ABS stopped working. (Old school ride)

2. Rode about 10miles. Turned bike off to fuel up. Bike restarted OK. ABS light went off as it should. ABS worked OK.

3. Suspension warning light stayed on. While bike running with engine running - I don’t get the Suspension adjustment menu. It shows only with engine off but ignition on ‘ON’.

4. The right side screen will not show the Trip Mileage and current total miles when ignition on ‘ON’. It shows when engine turned on .
Left screen shows the number 44. Is this an Error Code?

What could have caused this ?
Any ‘easy’ fix ?

 

[whisperquiet]

You might try a reset.

How to reset the ES Suspension

Copied from another post: edit , just got it fingered out. ok just went out and played with it, here's what i did, put it on center stand held tcs and reset buttons down while turning key on held buttons down for 8 seconds ecu AND SCU options came up, using tcs button i scrolled to...

yamahasupertenere.com

 

[Checkswrecks]

Thread moved

Start threads in an appropriate sub-forum

Mgmt

 

[Rambler]

You might try a reset.

How to reset the ES Suspension

Copied from another post: edit , just got it fingered out. ok just went out and played with it, here's what i did, put it on center stand held tcs and reset buttons down while turning key on held buttons down for 8 seconds ecu AND SCU options came up, using tcs button i scrolled to...

yamahasupertenere.com

I just did the reset per the instructions and the suspension warning light is gone and the right hand side panel shows the trip information.

Thank you and a big Thanks to @Taodady for the original post with the reset instructions!

 

[Rambler]