Gen2 Windscreen brackets to stop vibrations **SOLD OUT**

Propsoto

Active Member
Joined
Feb 11, 2014
Messages
208
Location
Appleton, WI
**SOLD OUT** However, everything you need to make your own is in the thread titled ”Accessory Bar Vibrations”

Braces are laser cut aluminum and powder coated flat black . They use the existing winglet mounting holes (They work fine with the winglets). These bars still allow adjustment of the windscreen. I'm 6'-4", so my windscreen lives in the highest position, it has not slid down.

These have been on my bike for a few years now. It is really nice being able to read my GPS and radar detector. Before the braces I could only read my GPS on the smoothest asphalt.

All necessary mounting hardware is included.

Hope you all like them.

Here is a link to another thread regarding my braces.
]http://www.yamahasupertenere.com/index.php?topic=19196.0/url]
 

Attachments

Last edited:

Jeff

Member
Joined
Apr 27, 2011
Messages
123
Location
Galt, CA 95632
Re: Re: 2014 Screen Vibrations

Propsoto I sent you an email so I can get your email address for payment.
 

Gpz750

New Member
Joined
Aug 13, 2016
Messages
18
Location
Minneapolis
Re: Re: 2014 Screen Vibrations

Propsoto said:
If any of you are looking for some windscreen/accessory bar braces I have a dozen more sets that I had laser cut. They use the existing winglet mounting holes (I'm told they work fine with the winglets). These bars still allow adjustment of the windscreen. I'm 6'-4", so my windscreen lives in the highest position, it has not slid down.

These have been on my bike for most of the spring/summer, it is really nice being able to read my GPS and radar detector. Before the braces I could only read my GPS on the smoothest asphalt.

If you'd like a pair, just send $20 (cash or check, no Paypal) & your address to:

Tom Propson
15 Reef Court
Appleton, WI 54915

I'll include the grommets (not needed if you use compression nuts to mount). You will need to supply you're own hardware and paint them.

Hope you all like them.

Here is a link to another thread regarding my braces.
http://www.yamahasupertenere.com/index.php?topic=19196.0/url] [/quote] Still available? I ran into another tenere rider who showed me these. Sent from my SPH-L720T using Tapatalk
 

Propsoto

Active Member
Joined
Feb 11, 2014
Messages
208
Location
Appleton, WI
Re: Re: 2014 Screen Vibrations

Gpz750 said:
Still available? I ran into another tenere rider who showed me these.

Sent from my SPH-L720T using Tapatalk
Yes they are still available . The current batch is powder coated flat black.

You can PayPal $25 (price includes shipping in lower 48)

Thanks

Tom
 

Attachments

Last edited:

VRODE

Easy Does It
Joined
Aug 7, 2014
Messages
940
Location
Northern Vermont
Installed mine (I used 1 inch bolts instead of the 3/4 supplied) . They look really good and no more shaking windscreen. Now I can use my gps on the bar. Thanks Tom!!
 

Propsoto

Active Member
Joined
Feb 11, 2014
Messages
208
Location
Appleton, WI
lacofdfireman said:
Will these work with the MadStad? And do you have any black ones left?
It's pretty unlikely they would fit. I designed them specifically for 2014+ Super Ténéré.

I still have two left. Ordered 25 more today.
 

Propsoto

Active Member
Joined
Feb 11, 2014
Messages
208
Location
Appleton, WI
Sold out of brackets, for the moment....my shop says I'll have more August 28th.

I'll post when they are in.

Thank you to all who have purchased them.

Tom
 

JSTRUMMER

Member
Joined
Mar 4, 2017
Messages
33
Location
Central CT
This is one of the best, and least expensive mods i've ever done on either bike i've owned.
I ordered on a Tuesday, received Friday, installed in 10 minutes and couldn't be happier with the way they work.
Thank You Tom for excellent product and service!
Mike G in CT ::012::
 

Propsoto

Active Member
Joined
Feb 11, 2014
Messages
208
Location
Appleton, WI
JSTRUMMER said:
This is one of the best, and least expensive mods i've ever done on either bike i've owned.
I ordered on a Tuesday, received Friday, installed in 10 minutes and couldn't be happier with the way they work.
Thank You Tom for excellent product and service!
Mike G in CT ::012::
Thanks so much!
 

mebgardner

Active Member
Joined
Mar 27, 2015
Messages
384
Location
Tucson AZ
'Nother Happy Customer! Attached 'n bolted up with ease.

Here's a tip: Ask the customer if they have the side winglets, they bolt up with the brace if ya got them too.

The cap screws need to be about another 1/8 in. longer if you have the winglets. Otherwise, the nyloc nuts, don't lock. They're not long enough.

I have winglets. I looked thru my hardware, but did not have something longer in any screw type. Soooooo, made do, but the nyloc, did not lock up.
 

Propsoto

Active Member
Joined
Feb 11, 2014
Messages
208
Location
Appleton, WI
mebgardner said:
'Nother Happy Customer! Attached 'n bolted up with ease.

Here's a tip: Ask the customer if they have the side winglets, they bolt up with the brace if ya got them too.

The cap screws need to be about another 1/8 in. longer if you have the winglets. Otherwise, the nyloc nuts, don't lock. They're not long enough.

I have winglets. I looked thru my hardware, but did not have something longer in any screw type. Soooooo, made do, but the nyloc, did not lock up.
You talked me into it.....the next ones will include M6x25 hardware for you guys with winglets.
 

Ron Earp

Member
Joined
Nov 22, 2015
Messages
250
Location
Cary NC
Have you any more of these? Could use two sets with the mounting hardware. If you do have them let me know, post here or via PM.
 
Top