Search results

I put in the newest Yamaha vesion. Sent from my SM-G975U using Tapatalk

Yep. The original Gen 2 is on the left and the new is on the right. While I was adjusting the valves on my '14 the cam chain tensioner got hung up and would not extend after being retracted a few times. Sent from my SM-G975U using Tapatalk

The Badlands, SD, June 2020. Sent from my SM-G975U using Tapatalk

Valve adjustment. 50K miles and 7 needed to drop to the next size dowm shim. Had to get a new CCT since mine didn't want to pop out after retracting it a few times. Not much room to work in there. Sent from my SM-G975U using Tapatalk

I left Atlanta Sunday morning. Devils Tower today. More Black Hills exploring tomorrow then the Badlands before I go see family in Wisconsin then home to Atlanta. Sent from my SM-G975U using Tapatalk

so much more useful. all of my stuff is either USB oir SAE type connection

Had mine replaced under YES at 13 months and around 10,000 miles. Just a tiny bit of oil in the skid plate. They replaced the pump and the new one does the same. I'm at 42,000miles and 4 years now. I dont worry about it. I never see any on the floor and wipe it off the skid plate when I change...

Near the "Aztec Ruins" Turtletown, TN.

Hard to beleive that was in a McDonald's parking lot. The food was excellent. Crawfish at the restaurant on the crawfish farm. Jumbo shrimp. Corn on the cob. Bread pudding. It's worth the ride. They are only open 12 weeks/year. http://hawkscrawfish.com 1350 miles in 2 days. I'm pooped!

Rode it 690 miles for Crawfish in Louisiana.

Got my wheel back from Woody's yesterday. Straight and trued. Mounted and balanced a Mitas E07 and gave the bike a bath. But most importantly, I installed the new sticker.

I posted up above that I got mine out the other day by loosening up the lower crash bar bolts. It came right out. You may have enough room without, but it only took a few seconds to turn them out some.

Thanks. I loosened the lower crash bar bolts to give it some more wiggle room. Actually removed the rear bolt and then was able to maneuver the battery out. Going to pick up a new one in a few.

Anyone know if you can wrestle the battery out with AltRider cars installed? Looking at mine tonight and It didn't look like I can. I was thinking about replacing the battery before an up coming trip, but my front wheel is at Woodys. So the bike is on a hack under the ACD plate. To get the...

When I spoke to the folks at Woody's about my banged up wheel, they suggested getting a can of bead sealant and using that after they fix my wheel. I got this Slime brand for $16 on Amazon. Slime 10137 Bead Sealer, 32 oz. https://www.amazon.com/dp/B00HFLIN92/ref=cm_sw_r_cp_apa_i_XT7HCb99BDSEN...

Shipped my front wheel off to Woody's for a repair. I clobbered it on a rock in a creek crossing on the MABDR last October. I should have done it sooner rather than the beginning of spring, but I thought it was OK to ride on. It had a bit of a vibration and lost 6psi/day so I figured I...

I can't see it being a $18k bike though.

Are you talking about what U have circled in red? That's the space between the accessory bar and the top of the cluster.

The ES looks like someone priced it together from crashed bikes with the white tank, black plastic and blue wheels. The non-ES looks better, but didnt they fo thst Blue tank/Black plastic a few years ago? Like Sierra1. I'm glad I got mine when I did.

My Yamaha cases are fine after multiple off road tip-overs. Mind you... tip overs. Not fling the bike over a ravine or throw it down the highway. It not like you dump the bike and you are guaranteed a yard sale where all your junk spills out.