Search results

  1. Moto addict

    Need a video of a CCT install?

    What I did after the Graves CCT was installed is turn the adjuster in by hand until it bottoms out. Then turn the adjuster with a wrench 1/4 turn. This was a starting point. I rotated the crank by hand a couple revolutions to make sure there was still tension. I then started the bike and let it...
  2. Moto addict

    Need a video of a CCT install?

    I just installed the Graves CCT today. What I did with the cluster of wires was take a wire tie around the cluster and anchor it to a point on the throttle body to pull them out of the way. Then you have clear access to the CCT bolts and removing the OEM CCT. I used a jack bolt like what has...
  3. Moto addict

    Rear wheel, brake damage from rock(s). Anyone seen this before?

    Update: Got my wheel back from being trued and put it all back together yesterday so my beloved S10 is back in action.:cool: After a month of downtime, I took a test ride last night and it felt great. I'll be out riding this weekend! :)
  4. Moto addict

    Rear wheel, brake damage from rock(s). Anyone seen this before?

    Picture was before disassembly. I've only had the bike two months and that is how it was when I got it. I did not notice a gap taking it apart but when I put it back together, I'll be sure to tighten the axle bolt first then the pinch bolt. Thanks for the tip.
  5. Moto addict

    Rear wheel, brake damage from rock(s). Anyone seen this before?

    Thanks for the responses and suggestions. I was able to get a caliper bracket off ebay for $25. Got a new brake rotor, bearings and caliper guides. Also got a used hub off ebay for $150. So my plan is going to put new bearings in the hub, remove spokes and broken hub from wheel. Re-lace wheel...
  6. Moto addict

    Rear wheel, brake damage from rock(s). Anyone seen this before?

    So here's my story: I purchased a very nice '12 S10 back in April and have been just loving this motorcycle. I bought this bike with the intention of going off pavement whenever possible. After only two months of riding it I managed to find a way to break the rear hub and brake components. I...
  7. Moto addict

    Parting out a Gen 1 tenere all parts available

    I know this is old but any parts available? Particularly the rear wheel? Rear caliper bracket? Rear brake rotor?
  8. Moto addict

    Hey Fort Wayne Indiana!!

    Hey I remember you! I'm in the pic you attached. I'm the one with the '12 S10. It was great meeting you. We'll have to try and hookup for a ride.
  9. Moto addict

    Hey Fort Wayne Indiana!!

    Hello fellow Hoosier riders. Just bought a very nice 2012 Super Tenere and I'm absolutely loving it. Found this forum and wanted to see who's out there. Definitely open to riding with others and would eventually love to do a trip out west with some other riders.
Top