was going to recommend the same thing, protaper adv bars ended my numb hand issue the stock bars gave me (im tall so i did adv high)
comparison on size (the sweep/angle is the important part )
nice yah if im not in a hurry ill typically take that route when i head anywhere mid/southern colorado from here in denver, as opposed to taking 67 or other pavement routes
Yep right off goose creek rd, bit after the trees start again, couple miles before that road it hits Tarryall rd. Its usually a spot I hit during the fall for the massive amount of aspens changing.
https://goo.gl/maps/W497ppFtcV2J3mLn6
Haven Tents | Lay Flat Hammock Tents | Camping Hammocks
Haven tents, I have an XL and the Safari both the same size just different weight (one is my glamping setup)
taken my s10 on some crazy stuff its very capable it always seems to be able to just tractor on.
turning off traction control and using my abs disable switch, makes this thing slide right around like a fat dirtbike when needed.
not my video but one of someone taking a s10 on single track...
in my experience your helmet tends to hit the screen top well before those could make contact with ya. If going offroad you will want to lower the windscreen down all the way, where those would be less prominent.
when you turn the key can you hear the buzz of the fuelpump priming?
the first thing to try, and usually fixes it is jump the battery if its not strong, and hold it WOT and crank till it pops after that then it should fire up typically.
if you already have a set mounted you shouldnt need any new adapters just reuse the reverse adaptor and extension that you should already have to mount the old balls.
the second set i posted is my preference.
on the first set beacuse of the mounting on the trex bars it tilted down a bit so it worked but felt like it could possibly have your boot slide off.
For Bmw R1250gs R 1250 Gs Adv Adventure Lc 2019 2020 Motorcycle Highway Front Driver Footrest Foot Pegs Rest Pedal Pad Footpegs - Foot Rests - AliExpress
I did change over to these ones when i built my second s10
Motorcycle Highway Front Foot Pegs Folding Footrests Clamps 22mm 25mm For BMW...
since its along the lines of this thread, I recently designed and 3d printed some bases to attach to some amazon spotter mirrors, to add to the ram arms. and not block part of the normal mirror. So far works fine they keep in place under 100mph :)