Author Topic: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?  (Read 6893 times)

Offline ~TABASCO~

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • *
  • Posts: 5214
  • RIDE ON ADV is what I do !
  I want to start looking for a stronger pair of pegs.. In the last year I have seen several pictures of several Super Tenere pegs breaking....   I'm sure it would be under warranty.....  But after I fall and brake my arm and back I don't think that will be under the Yamaha warranty :D 

  Anyone know if the YZ450 pegs will fit ?   They had something change in or about 08-09... there are new part numbers for the 2010, Etc......   I know that Pivot pegs already have there model out.. Ive tried them before and didn't like them....  I just want a standard race dirt bike peg......   Any ideas ?  THANK
« Last Edit: August 05, 2011, 02:50:08 pm by ~TABASCO~ »
Lowering Links & Rising Links shipping now !



https://www.facebook.com/pages/Ride-On-ADV/678244025556248

.

Shipping HEIDENAU'S... In stock

www.rideonadv.com
2012 Super Tenere - 1"bar riser - motoX grips - ECUnleashed flash - Barnett clutch pressure plate - UNI filter - Air box mod - Akrapovic custom muffler - Arrow headers - PCV&AT - Ohlins suspension front & rear - Trailtech Voyager - Steel braded lines on everything - Ride On skid plate - Carbon fork guards - rear disc gard - rear res guard - WC turn signals - WC headlight guard - ADV tires - WC/ride on graphics - sync TB - Baja Squadrons & S2 - custom dash LED's - Custom light harness - Ride On custom light switch - Keyless gas cap

Offline Firefight911

  • Hero Member
  • *****
  • *
  • *
  • Posts: 1613
    • SmugMug Site
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #1 on: August 05, 2011, 02:36:07 pm »
You can not go wrong here;

http://www.touratech-usa.com/Store/PN-PP-16MK3/Pivot-Pegz-MK3-Yamaha-XT1200Z-Super-Tenere

The Pivot Pegz have been on each of my last four bikes.  Don't leave home without them!
Phil Challinor

Where  am I?

'12 Yamaha Tenere born August 4, 2011

Offline ~TABASCO~

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • *
  • Posts: 5214
  • RIDE ON ADV is what I do !
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #2 on: August 05, 2011, 02:49:20 pm »
You can not go wrong here;

http://www.touratech-usa.com/Store/PN-PP-16MK3/Pivot-Pegz-MK3-Yamaha-XT1200Z-Super-Tenere

The Pivot Pegz have been on each of my last four bikes.  Don't leave home without them!


 :D   Yo, knucklehead... I just wrote I have tried them and didn't dig them....  :D     I'm kidding around....  I have tried them and I guess im more old school.. I didn't like them moving around "for me"... Just looking for a race moto-x type peg....   Thanks Sir ! ! !   ;D
Lowering Links & Rising Links shipping now !



https://www.facebook.com/pages/Ride-On-ADV/678244025556248

.

Shipping HEIDENAU'S... In stock

www.rideonadv.com
2012 Super Tenere - 1"bar riser - motoX grips - ECUnleashed flash - Barnett clutch pressure plate - UNI filter - Air box mod - Akrapovic custom muffler - Arrow headers - PCV&AT - Ohlins suspension front & rear - Trailtech Voyager - Steel braded lines on everything - Ride On skid plate - Carbon fork guards - rear disc gard - rear res guard - WC turn signals - WC headlight guard - ADV tires - WC/ride on graphics - sync TB - Baja Squadrons & S2 - custom dash LED's - Custom light harness - Ride On custom light switch - Keyless gas cap

Offline Firefight911

  • Hero Member
  • *****
  • *
  • *
  • Posts: 1613
    • SmugMug Site
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #3 on: August 05, 2011, 02:54:06 pm »
:D   Yo, knucklehead... I just wrote I have tried them and didn't dig them....  :D     I'm kidding around....  I have tried them and I guess im more old school.. I didn't like them moving around "for me"... Just looking for a race moto-x type peg....   Thanks Sir ! ! !   ;D

Good grief!  I AM a knucklehead.  Sorry.  All the afterglow and excitement of picking my S10 up yesterday.  Sorry!  Back to my hole.
Phil Challinor

Where  am I?

'12 Yamaha Tenere born August 4, 2011

Offline SpeedStar

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1388
  • XT12 and DL650
Devin  -  Raven XT12
:exclaim:  FS: Check out my SUPER TENERE GUARDS in Vendors:  :exclaim:

Gas Tank Side Panel guards, Rear Tank Guards, Fork Tube Guards, Headlight Masks and Exhaust Shield Masks.
Click here:
 ::022:: http://www.yamahasupertenere.com/index.php?topic=1697.0

Offline ~TABASCO~

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • *
  • Posts: 5214
  • RIDE ON ADV is what I do !
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #5 on: August 05, 2011, 04:39:47 pm »
Thanks guys...................    I think im kinda leaning toward these.....  maybe

Lowering Links & Rising Links shipping now !



https://www.facebook.com/pages/Ride-On-ADV/678244025556248

.

Shipping HEIDENAU'S... In stock

www.rideonadv.com
2012 Super Tenere - 1"bar riser - motoX grips - ECUnleashed flash - Barnett clutch pressure plate - UNI filter - Air box mod - Akrapovic custom muffler - Arrow headers - PCV&AT - Ohlins suspension front & rear - Trailtech Voyager - Steel braded lines on everything - Ride On skid plate - Carbon fork guards - rear disc gard - rear res guard - WC turn signals - WC headlight guard - ADV tires - WC/ride on graphics - sync TB - Baja Squadrons & S2 - custom dash LED's - Custom light harness - Ride On custom light switch - Keyless gas cap

Offline SpeedStar

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1388
  • XT12 and DL650
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #6 on: August 05, 2011, 04:42:18 pm »
Those look beefy!  Who makes em?
Devin  -  Raven XT12
:exclaim:  FS: Check out my SUPER TENERE GUARDS in Vendors:  :exclaim:

Gas Tank Side Panel guards, Rear Tank Guards, Fork Tube Guards, Headlight Masks and Exhaust Shield Masks.
Click here:
 ::022:: http://www.yamahasupertenere.com/index.php?topic=1697.0

Offline japako

  • Hero Member
  • *****
  • *
  • *
  • *
  • Posts: 2779
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #7 on: August 05, 2011, 05:09:05 pm »
That's a nice looking peg, but will wear out the soles of your boots pretty quick.
Could you tell me where you read about the pegs on the s10 breaking. I stand on the pegs and would not like that happening. :D
Jim

2012  Blue Super Tenere  Sold
2011  WR250R


www.rideonadv.com

Online simmons1

  • Sr. Member
  • ****
  • *
  • Posts: 393
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #8 on: August 05, 2011, 05:30:42 pm »
That's a nice looking peg, but will wear out the soles of your boots pretty quick.


Very true. I have real real dirt bike pegs on my old KLR that I use for commuting and I have just about worn through the sole of my left boot. The right is close behind it.
GL1800 / Super Tenere / WR250R / ST1300 / KLR650 /  GS1000S / H2 750

Offline ~TABASCO~

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • *
  • Posts: 5214
  • RIDE ON ADV is what I do !
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #9 on: August 05, 2011, 05:31:07 pm »
Those look beefy!  Who makes em?

Pro Taper
Lowering Links & Rising Links shipping now !



https://www.facebook.com/pages/Ride-On-ADV/678244025556248

.

Shipping HEIDENAU'S... In stock

www.rideonadv.com
2012 Super Tenere - 1"bar riser - motoX grips - ECUnleashed flash - Barnett clutch pressure plate - UNI filter - Air box mod - Akrapovic custom muffler - Arrow headers - PCV&AT - Ohlins suspension front & rear - Trailtech Voyager - Steel braded lines on everything - Ride On skid plate - Carbon fork guards - rear disc gard - rear res guard - WC turn signals - WC headlight guard - ADV tires - WC/ride on graphics - sync TB - Baja Squadrons & S2 - custom dash LED's - Custom light harness - Ride On custom light switch - Keyless gas cap

Offline ~TABASCO~

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • *
  • Posts: 5214
  • RIDE ON ADV is what I do !
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #10 on: August 05, 2011, 05:32:59 pm »
Very true. I have real real dirt bike pegs on my old KLR that I use for commuting and I have just about worn through the sole of my left boot. The right is close behind it.

I agree with you... These have three type of "grip spikes"   a Low profile,  Medium profile, and a High 'race' profile............... They come with the tall spikes.... Ill get the low-pro....  ;)
Lowering Links & Rising Links shipping now !



https://www.facebook.com/pages/Ride-On-ADV/678244025556248

.

Shipping HEIDENAU'S... In stock

www.rideonadv.com
2012 Super Tenere - 1"bar riser - motoX grips - ECUnleashed flash - Barnett clutch pressure plate - UNI filter - Air box mod - Akrapovic custom muffler - Arrow headers - PCV&AT - Ohlins suspension front & rear - Trailtech Voyager - Steel braded lines on everything - Ride On skid plate - Carbon fork guards - rear disc gard - rear res guard - WC turn signals - WC headlight guard - ADV tires - WC/ride on graphics - sync TB - Baja Squadrons & S2 - custom dash LED's - Custom light harness - Ride On custom light switch - Keyless gas cap

Offline ~TABASCO~

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • *
  • Posts: 5214
  • RIDE ON ADV is what I do !
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #11 on: August 05, 2011, 05:37:08 pm »
That's a nice looking peg, but will wear out the soles of your boots pretty quick.
Could you tell me where you read about the pegs on the s10 breaking. I stand on the pegs and would not like that happening. :D

Several have broken over on the ADVRider site... Guys where going off road and the peg it self snapped off....   "IF" that ever happened to me I would really be pissed.... Not cuz it would cost to replace, (but wouldn't under warranty) its because the chance of me getting really hurt if it broke would be high, someone could get really hurt... not worth chancing on an aluminum peg...  JMOP
« Last Edit: August 05, 2011, 07:05:25 pm by ~TABASCO~ »
Lowering Links & Rising Links shipping now !



https://www.facebook.com/pages/Ride-On-ADV/678244025556248

.

Shipping HEIDENAU'S... In stock

www.rideonadv.com
2012 Super Tenere - 1"bar riser - motoX grips - ECUnleashed flash - Barnett clutch pressure plate - UNI filter - Air box mod - Akrapovic custom muffler - Arrow headers - PCV&AT - Ohlins suspension front & rear - Trailtech Voyager - Steel braded lines on everything - Ride On skid plate - Carbon fork guards - rear disc gard - rear res guard - WC turn signals - WC headlight guard - ADV tires - WC/ride on graphics - sync TB - Baja Squadrons & S2 - custom dash LED's - Custom light harness - Ride On custom light switch - Keyless gas cap

Offline japako

  • Hero Member
  • *****
  • *
  • *
  • *
  • Posts: 2779
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #12 on: August 05, 2011, 05:47:58 pm »
Thanks for the heads up Jaxon. I will have to consider this now.. more freaking money....  :'(
Jim

2012  Blue Super Tenere  Sold
2011  WR250R


www.rideonadv.com

Offline ~TABASCO~

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • *
  • Posts: 5214
  • RIDE ON ADV is what I do !
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #13 on: August 05, 2011, 07:03:04 pm »
Thanks for the heads up Jaxon. I will have to consider this now.. more freaking money....  :'(

I feel ya bro............  To pay for a few part I need to go find a fifth job......    :D
Lowering Links & Rising Links shipping now !



https://www.facebook.com/pages/Ride-On-ADV/678244025556248

.

Shipping HEIDENAU'S... In stock

www.rideonadv.com
2012 Super Tenere - 1"bar riser - motoX grips - ECUnleashed flash - Barnett clutch pressure plate - UNI filter - Air box mod - Akrapovic custom muffler - Arrow headers - PCV&AT - Ohlins suspension front & rear - Trailtech Voyager - Steel braded lines on everything - Ride On skid plate - Carbon fork guards - rear disc gard - rear res guard - WC turn signals - WC headlight guard - ADV tires - WC/ride on graphics - sync TB - Baja Squadrons & S2 - custom dash LED's - Custom light harness - Ride On custom light switch - Keyless gas cap

Offline ~TABASCO~

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • *
  • *
  • Posts: 5214
  • RIDE ON ADV is what I do !
Re: Anyone know? What year Yamaha dirt bike peg fit on our new bike ?
« Reply #14 on: August 06, 2011, 09:29:00 am »
Does anyone know if just normal aftermarket dirt bike (Yamaha) pegs will fit? 
Lowering Links & Rising Links shipping now !



https://www.facebook.com/pages/Ride-On-ADV/678244025556248

.

Shipping HEIDENAU'S... In stock

www.rideonadv.com
2012 Super Tenere - 1"bar riser - motoX grips - ECUnleashed flash - Barnett clutch pressure plate - UNI filter - Air box mod - Akrapovic custom muffler - Arrow headers - PCV&AT - Ohlins suspension front & rear - Trailtech Voyager - Steel braded lines on everything - Ride On skid plate - Carbon fork guards - rear disc gard - rear res guard - WC turn signals - WC headlight guard - ADV tires - WC/ride on graphics - sync TB - Baja Squadrons & S2 - custom dash LED's - Custom light harness - Ride On custom light switch - Keyless gas cap

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
2083 Views
Last post March 14, 2011, 02:41:01 pm
by switchback
39 Replies
8503 Views
Last post March 27, 2011, 10:44:04 pm
by fredz43
18 Replies
4431 Views
Last post July 24, 2011, 04:23:31 pm
by keeponriding
0 Replies
662 Views
Last post June 03, 2015, 02:35:56 pm
by Rgh999
5 Replies
367 Views
Last post April 13, 2017, 02:17:22 pm
by motodoc42