gv550's latest activity
-
JOB DONE. yep update, turned out there was nothing wrong with the mccruise as the compamy said all along and they have been superb... -
gv550 replied to the thread McCRUISE fitted today but have issues.I'd be more concerned about the aftermarket sensor, install a known working Yamaha sensor before changing other parts. And I agree with...
-
gv550 replied to the thread Whining noise from engine..Yes, I had a flashlight above and caused the oil to shine a bit silver. Here's the same pleat with no flashlight. There are no metal...
-
-
gv550 replied to the thread Whining noise from engine..Here's the oil filter, I couldn't find anything shiny in any pleat. This filter has been in service for 20,000 kms. I do have a video...
-
-
gv550 replied to the thread OEM pannier lock tumbler kit..And I discovered............... I can install a #4 in place of a #3, put the key in the lock and file the #4 down to the barrel and...
-
gv550 replied to the thread What you did to your Tenere today??!!.Mine measures 12.8mm.
-
gv550 replied to the thread Whining noise from engine..@~TABASCO~ , I did replace the Yamaha CCT with a Graves MCCT about 3000 kms ago, along with a new OEM cam chain. Had both cams out to...
-
gv550 replied to the thread Whining noise from engine..Thanks Jlq1969, I see that now in the periodic maintenance section, I was looking in the engine/oil pump section. It appears the...
-
-
gv550 replied to the thread Whining noise from engine..I rode the bike to Romney, WV last week. Bike ran fine and everything seemed normal, the whine persists. One morning I started the...
-
gv550 replied to the thread Side Stand Turn.I spin mine around regularly in my garage using the center stand, never the side stand. I doubt if either stand would work on anything...
-
I have this kit, 59C-281C0-00, and similar to a valve shim kit I've used up all of one size tumbler #3 which is 5.5 mm. Unlike a shim...
-
-
gv550 replied to the thread Yamaha factory panniers Australia.And then use kit 59c-281c0-00 to re-key your new locks to match your ignition.
-
-
gv550 replied to the thread Bike wasn't labeled. Had to be sure..Okay then..... but PMA?
-
gv550 replied to the thread Bike wasn't labeled. Had to be sure..Rabbit and tortoise I understand........ but what about 'STAY'?
-
gv550 replied to the thread Whining noise from engine..I think I have eliminated the stator as being the source of the noise. As mentioned, the system voltage is 13.9 to 14.1 while riding, I...
