Author Topic: FS: Rumbux Engine /Fairing Guard System  (Read 480 times)

Offline cycledelic relic

  • Jr. Member
  • **
  • Posts: 91
FS: Rumbux Engine /Fairing Guard System
« on: October 08, 2017, 09:51:36 pm »
I removed this combo sump & fairing guard from a 2014 Tenere.
It was tweaked slightly in a low speed accident. One upper guard mount tab needed straightening... which I have done.


There are scrapes on the bars that need sanding & some paint.


The upper & lower sections appear to be almost fully straightened...but I havent tried it on the bike for correct fit.





This can be yours if you dont mind a bit of refinishing...& fitting.

$400 + shipping
Note...
These go in a big box
30x24x18 & appx 30-35lbs
(to east coast appx $80 fedx grnd...over $125 usps grnd)

It has been suggested that these could be shipped cheaply by just wrapping them with shrink wrap....
I have checked with the shipping at Fedx & this is not true for oddly shaped items.
There is also a surcharge for the odd shape.
The dimensions given are actual measurements of the guards so boxed is appx the same.




Sent from my A450TL using Tapatalk
« Last Edit: October 19, 2017, 02:11:15 pm by cycledelic relic »

Offline cycledelic relic

  • Jr. Member
  • **
  • Posts: 91
Re: FS: Rumbux Engine /Fairing Guard System
« Reply #1 on: October 12, 2017, 08:13:07 pm »
& when I say ...a bit... I mean just some very easy stuff...no major straightening needed.... Mabe a tweak.. Some sanding...& paint

Sent from my A450TL using Tapatalk


Offline EricV

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • Posts: 4619
  • Rumbux Importer - Riding, farkling, riding...
Re: FS: Rumbux Engine /Fairing Guard System
« Reply #2 on: October 12, 2017, 09:30:34 pm »
The set looks to be in decent shape.  Mounting it up, then doing any minor tweaks is no big deal.

For the buyer, I can email a pdf file of the installation instructions, just PM or email me before or after you work your deal.  I'm fine with prospective buyers too.
Matte Black 2015 Super Tenere
Rumbux Adventure Products Importer
Eval Innovations Inc.

Offline pkelly20

  • Newbie
  • *
  • Posts: 9
Re: FS: Rumbux Engine /Fairing Guard System
« Reply #3 on: October 13, 2017, 07:22:57 am »
The set looks to be in decent shape.  Mounting it up, then doing any minor tweaks is no big deal.

For the buyer, I can email a pdf file of the installation instructions, just PM or email me before or after you work your deal.  I'm fine with prospective buyers too.
Will they fit a 2017 ES model?


Sent from my iPhone using Tapatalk

Offline EricV

  • Hero Member
  • *****
  • *
  • *
  • *
  • *
  • Posts: 4619
  • Rumbux Importer - Riding, farkling, riding...
Re: FS: Rumbux Engine /Fairing Guard System
« Reply #4 on: October 13, 2017, 12:28:04 pm »
Will they fit a 2017 ES model?

Yes.  There have been no changes that affect fitment on Rumbux crash bars for the Super Tenere.  All years are compatible and no changes that would affect fitment have been made to the Rumbux kits over the years.
Matte Black 2015 Super Tenere
Rumbux Adventure Products Importer
Eval Innovations Inc.

Offline pkelly20

  • Newbie
  • *
  • Posts: 9
Re: FS: Rumbux Engine /Fairing Guard System
« Reply #5 on: October 13, 2017, 02:12:41 pm »
Yes.  There have been no changes that affect fitment on Rumbux crash bars for the Super Tenere.  All years are compatible and no changes that would affect fitment have been made to the Rumbux kits over the years.
Thank you for the reply.


Sent from my iPhone using Tapatalk

Offline pkelly20

  • Newbie
  • *
  • Posts: 9
Re: FS: Rumbux Engine /Fairing Guard System
« Reply #6 on: October 13, 2017, 02:13:31 pm »
& when I say ...a bit... I mean just some very easy stuff...no major straightening needed.... Mabe a tweak.. Some sanding...& paint

Sent from my A450TL using Tapatalk
I’m interested in these for my 2017 ST ES model.


Sent from my iPhone using Tapatalk

Offline Checkswrecks

  • Global Moderator
  • Hero Member
  • *****
  • *
  • Posts: 6955
  • Ungenear to broked stuff
Re: FS: Rumbux Engine /Fairing Guard System
« Reply #7 on: October 13, 2017, 04:01:20 pm »
I’m interested in these for my 2017 ST ES model.


Sent from my iPhone using Tapatalk


Then pm the seller. A lot of members don't check here regularly, but a pm will go to their personal email. (If they left the original settings when joining.)
Damascus, MD
XTZ1200, KTM 690R

Offline pkelly20

  • Newbie
  • *
  • Posts: 9
Re: FS: Rumbux Engine /Fairing Guard System
« Reply #8 on: October 13, 2017, 04:56:34 pm »

Then pm the seller. A lot of members don't check here regularly, but a pm will go to their personal email. (If they left the original settings when joining.)
Good thinking - done.


Sent from my iPhone using Tapatalk

Offline cycledelic relic

  • Jr. Member
  • **
  • Posts: 91
Re: FS: Rumbux Engine /Fairing Guard System
« Reply #9 on: October 15, 2017, 07:49:47 am »
Im on a long weekend in the Ozarks right now but will be in contact when I return

Sent from my A450TL using Tapatalk


 


testate