Author Topic: Angled bar clamps  (Read 284 times)

Offline Kimmern

  • Newbie
  • *
  • Posts: 4
Angled bar clamps
« on: December 05, 2017, 06:09:55 pm »
I bought  1 1/4" Block Offset Risers for 1 1/8" Handlebar for my super tenere 2016 ES model but they did not fit because of the angled bar clamps. Im asking if there are someone who has these on and somehow solved this angled bar clamps problem.

Otherwise i will sell them...

Offline Thrasherg

  • Newbie
  • *
  • Posts: 30
Re: Angled bar clamps
« Reply #1 on: December 05, 2017, 08:54:37 pm »
I use the Helibars riser on my ES, they work really well and come with a short extension for the hydraulic brake line.

https://www.helibars.com/categories/Handlebar-Risers-%26-Adapters-by-Bike-Brand/HeliBars-for-Yamaha/Yamaha-Super-Tenere/

Gary
« Last Edit: December 06, 2017, 11:14:09 am by Thrasherg »

Offline Kimmern

  • Newbie
  • *
  • Posts: 4
Re: Angled bar clamps
« Reply #2 on: December 06, 2017, 05:17:33 am »
Thank u thrasherg for ur reply. I already know about the helibars, but i was curious if someone has a solution for this angled bar clamps so i might use these rox offset risers on my ES bike.

Offline gv550

  • Full Member
  • ***
  • Posts: 149
Re: Angled bar clamps
« Reply #3 on: December 06, 2017, 08:11:48 am »
I'm looking at 25 mm angled risers on eBay from sfs_brake_moto in Turkey, sorry I don't know how to attach a link.
$48 plus 10 for shipping and they appear to follow the contours of the stock risers. Does anyone here have experience with these?
Garry

2016 Super Tenere ...fast Yellow....
*Givi engine guards, skid plate and XS308 tank bag.
*Oxford heated grips with Grab-on wrap.
*Yamaha side cases and top box.
*Yamaha tall shield and side deflectors.
*Zumo 660
*Mitas E07 tires
2009 Kawasaki Vulcan Voyager

Online Roge

  • Sr. Member
  • ****
  • *
  • *
  • Posts: 464
Re: Angled bar clamps
« Reply #4 on: December 06, 2017, 03:44:05 pm »
Thank u thrasherg for ur reply. I already know about the helibars, but i was curious if someone has a solution for this angled bar clamps so i might use these rox offset risers on my ES bike.


Rox do a set of adjustable risers specifically for the 2014 + S10
« Last Edit: December 07, 2017, 02:05:41 pm by Roge »
The Mutts Nuts

Offline Dazzerb

  • Newbie
  • *
  • Posts: 15
Re: Angled bar clamps
« Reply #5 on: December 07, 2017, 07:36:51 am »

Offline Checkswrecks

  • Global Moderator
  • Hero Member
  • *****
  • *
  • Posts: 7173
  • Ungenear to broked stuff
Re: Angled bar clamps
« Reply #6 on: December 07, 2017, 07:41:59 am »
Sounds like you may have bought the risers for the first generation bike. (2010-2013)
Damascus, MD
XTZ1200, KTM 690R

Offline Dogdaze

  • Hero Member
  • *****
  • Posts: 2531
Re: Angled bar clamps
« Reply #7 on: December 07, 2017, 08:23:23 am »
Sounds like you may have bought the risers for the first generation bike. (2010-2013)


 ::026::  Sounds about right, nothing should be a difficult fit, otherwise it is the wrong part.
As I get older, I am no longer surprised at what I know, I'm surprised at how much I don't know.

Offline Kimmern

  • Newbie
  • *
  • Posts: 4
Re: Angled bar clamps
« Reply #8 on: December 07, 2017, 06:13:22 pm »
Yes. I bought this riser thinking this would fit my 2016 model without the need of extending any lines and etc. I would like to see altrider.eu write somewhere that this riser cannot fit 2014+ handlebars on their website so things are little more informed.

Well im gonna make another post now on the sale forum where i am going to sell this rox risers.

Well thx for all the replies and the help. This forum is brilliant. :) :)
« Last Edit: December 07, 2017, 06:14:57 pm by Kimmern »

Offline Checkswrecks

  • Global Moderator
  • Hero Member
  • *****
  • *
  • Posts: 7173
  • Ungenear to broked stuff
Re: Angled bar clamps
« Reply #9 on: December 07, 2017, 07:08:39 pm »
Flattery will get you everywhere.
 :D
Damascus, MD
XTZ1200, KTM 690R

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
1226 Views
Last post June 26, 2012, 11:51:26 am
by biting_point
10 Replies
1955 Views
Last post May 22, 2014, 11:58:07 am
by Reveille
12 Replies
2553 Views
Last post May 19, 2014, 06:05:40 pm
by Anders79_SWE
15 Replies
4905 Views
Last post April 24, 2015, 10:06:25 am
by Scouse
2 Replies
447 Views
Last post February 19, 2017, 09:16:35 pm
by Gonzodog


testate